What is the thread diameter for the insert of this anchor? I am looking for something slightly less than 0.5" (anchor is less than 3/4") - one of the anchors was lost during pool opening and I just noticed it...
Reply
The large majority of safety covers use the same brass anchor which is this anchor. If you used a 3/4" Masonry drill bit when you installed the cover this would be the anchor you would need.
Reply
What is the length of these anchors before the are fully extended?
Reply
This spring is 8" long and are manufactured to allow up to 60% compression or extension.
Reply
Can I purchase just the screw in part and not the bottom part that anchors into the concrete?
Reply
Hello,Please view Pool Safety Cover Parts and Accessories http://www.inyopools.com/ProductListing/covers_safety_parts.aspx for the accessories offered.
Reply
I am also looking for the screw portion only. Is this still not an option? If not, do you have any suggestions of other places to look for just that part? Who is the manufacturer? Thank you.
Reply
Is the anchor bolt sold separately? Are they standard size, mine measures 1/2 ".
Reply
These brass anchors are sold as individual units. They measure 1-5/8" long and fit a 3/4" Hole.
Reply
how many anchors do i need for the 16x 32 cover
Reply
A 16 x 32 Safety cover will have 22 anchor points. If you are buying a new cover, all hardware comes with the cover.
Reply
how do I get the pool cover open (special tool ) with those brass anchor's?I work for a mosquito vector control company,and need to inspect the water.
Reply
You would loosen the straps on the safety cover.
Reply
I need a replacement 3' long allen wrench for my brass anchors.
Reply
I have pop up Brass Anchors will The screw in ones fit. They are 7/8 long
Reply
Yes, the screw would match the 7/8".
Reply
What kind lube should you use on these brass threads before you try to remove them during cover installation? Mine are older and may be corroded. Should anti-seize be used on the threads before installing also.
Reply
Some customer's find PB Blaster to be helpful
Reply
how do you install these? just drill a hole and insert or is there more to it
Reply
Hi David, here is an installation video for installing a safety cover that may assist.
Reply
My anchor screw is 1-1/4 inches long. The outer diameter of the screw head is 5/8 inches. The outer diameter of the screw thread is 3/8 inches. Do you have a replacement anchor screw for this size screw?
Reply
Hello Robin, at this time we do not have a replacement we can suggest that will replace your unit.
Reply
