It appears that your browser has JavaScript disabled:
To provide the best experience on our website, we require your browser to have JavaScript enabled.
Here are the instructions for how to enable JavaScript in your web browser.
Once you've enabled Javascript, please refresh this page.

Or give us a call at 407-834-2200, and we would be happy to take your order by phone.

Back to Details

Questions for: Goldline Controls PS-8 Wired Wall Mount White Replaced by the Current Black Model AQL2-WW-PS-8

Got a Question?

? Asked on 4/19/2016by Inyo Visitor

is model AQL-WW-PS-8 AND AQL2WWPS8 is same? I need to replace inside home unit which is AQL-WW-PS-8.PLS let me know what item number you have that i can order. thanks
Reply

A Answered on 4/20/2016 by InyoPools Product Specialist Lennox H.

Hi, Model no. AQL-WW-PS-8 is an older unit, the AQL2WWPS8 will replace it.
Reply

? Asked on 7/27/2017by Inyo Visitor

Does this replace wmw-ps-4
Reply

A Answered on 7/29/2017 by InyoPools Product Specialist Lennox H.

Hi. It will not, you will need model # AQL2WWPS4 with the compatible antenna.
Reply

? Asked on 1/20/2019by Chuck

My wired remote has tag on the board labeled AQL-REMOTE-PS-8. Is the AQL2-WW-PS-8 remote compatible as a replacement wired remote?

Goldline Controls PS-8 Wired Wall Mount White Replaced by the Current Black Model - AQL2-WW-PS-8

A Answered on 1/21/2019 by InyoPools Product Specialist Lennox H.

Hi, Chuck. This PS-8 Wired Wall Mount - White - AQL2WWPS8 will be compatible only if your main software is r2.00 or higher. To locate the main software enter the diagnostic menu then main software revision. If not you will need to replace the Main PCB - GLX-PCB-PRO.
Reply

? Asked on 12/1/2019by Jo

Will this replace an aql-ttw-rf-ps-8?
Reply

A Answered on 12/2/2019 by InyoPools Product Specialist Lennox H.

Hi, Jo. Yes, it can if it's within 500 ft.
Reply

? Asked on 2/14/2020by DAVID Muir

How do you set the pool to heat
Reply

A Answered on 2/18/2020 by InyoPools Product Specialist Lennox H.

Hi, David. If the heater has already been set up within the configuration and setting menu. You would Press the Button that is assigned to the Heater, it will turn it on. You can review the ProLogic PL-PS-8 Operation Manual.
Reply

? Asked on 6/30/2020by jon tindall

the system seems to work ok except. when it turns off, the system resets the valves to spillover mode. In this mode the spa drains to the pool level. can i change it so it stays in pool mode.
Reply

A Answered on 12/15/2020 by InyoPools Product Specialist Hector F.

Hi Jon, when the spa drains down to the pool level when the pump is off this is most often associated with a bad check valve in the plumbing for the spa. Once that is replaced that should eliminate the draining issue.
Reply