I need to replace my above ground pool pump. It is a waterco aquamite 2HP..would this dynamo pump have the same size connections etc, so that I could switch them out? I can't seem to find a waterco aquamite. Thanks!
Reply
Hello Linda - The Dynamo pump is not an exact match to the Aquamite. This Dynamo pump has 1.5" female threaded ports. This pump will work with most above ground systems. It may require fittings, flexible hose, and metal clamps.
Reply
I need a pump with 2HP single phase 110v
2" inlet & outlet
Dimension from floor to inlet center inlet 9.5"
do you have anything that fit the description above thank you very much
Reply
I believe this Jacuzzi Magnum 2 HP Pump is about as close as we can get. It can run at either 115/230, it has 2" port size and the inlet is 9 3/8" to center.
Reply
I need to replace my above ground pool pump. It is a waterway Hi Flo 2HP..would this dynamo pump have the same size connections etc, so that I could switch them out?
Reply
Hi, The Dynamo Pump will not be an exact replacement for the Waterway Pump, you will have to use different connections or use the Butress Adapter (417-4161).
Reply
What is the GPM for this pump?
Reply
Hello Heath- The Dynamo Pump 2 HP w/ STD Cord - 340219 has an approximate flow rate of 45 gpm.
Reply
I have a jacuzzi 1 1/2 motor that is no longer working . I want to move to the 2 hp for above ground pool . Would this work ?
Reply
I have a pentair dynamo 1.5 hp pump for my above ground pool with a 100# sand filter I ordered a pump but it has different threads from pump to filter , does this have the same threads as my 1.5 hp pump they are a fine thread
Reply
Hi, Korey. This Dynamo Pump has the same threads as your original Dynamo pump.
Reply
I have a Pentair Dynamo Pump 2HP (P/N: 340219). I noticed it was humming while trying to operate, resulting in tripping my circuit breaker. I opened the motor casing and the shaft was free spinning with 0 resistance. When searching for the capacitor there was none in my view. Any assistance would be appreciated.
Reply
Unfortunately, we do not have the listing for the Pentair capacitors you may use How To Select the Right Capacitor For Your Pool Pump Motor or contact Pentair directly at 1.800.831.7133 with the model and serial number from the motor.
Reply
I have an old 1.5hp Max-e-glas-2 pump that is not working, can this be a replacement?
Reply
Hi Joel, this would not be the correct replacement as it is specifically designed for above ground pools. We would suggest this 1.5 HP Waterway Pump the plumbing ports are not in the exact same location so you will have a little re-plumbing but nothing major.
Reply
Actually, if you go with this 1.5 HP Waterway Champion Pump then there are adjustable based included that will make it a drop in replacement for theMax-e-glas-2
Reply
