Part # 94027120
Alternate Part #'s 2UMF-S, 2UMFS, 9402-7120
Availability Please allow 3 - 4 weeks for delivery - SPECIAL ORDER
Patented air-cooled heat sink allowspump to run dry without damage to shaft seal. UNCONDITIONAL ONE YEAR WARRANTY AGAINST SEAL FAILURE.
Exclusive dual Ring-Lok™design gives "tool free" access to strainer basket and pump internals.
208 cu. in. (3411 cm3) heavy-duty strainer basket with exclusive priming tubefor superior priming capabilities.
Exclusive flap prevents debris in the pump strainer, skimmer basket and filter from flowing back into the pool. The flap also prevents residual hot water in the heater from flowing into filter and causing damage to grids, valves, gaskets, etc.
Internal ribs in large strainer basket assure flow, even when filled with leaves and debris.
One-piece casee liminates bolts and gaskets and provides for quiet operation.
Flexible connections- 2" (51 mm) FNPT or 2" (51 mm) unions (included).
Floating eye seal between closed impeller and diffuser maximizes efficiency.
Maximum water temperature 104 °F (40 °C).
Energy saver motors(1/2 HP - 3 HP) are standard on single speed units.
Dimensions of the Jacuzzi Magnum Force pump
Performance of the Jacuzzi Magnum Force pump
Gallons per Minute vs. Resistance to Flow (Feet to Head) | ||||||||
Horsepower | 30ft. | 40ft | 50ft | 60ft | 70ft | 80ft | 90ft | 100ft |
3/4 HP | 55gpm | 46 | 34 | 15 | - | - | - | - |
1.0 HP | 74 | 68 | 62 | 54 | 45 | 33 | - | - |
1.5 HP | 85 | 79 | 72 | 65 | 56 | 43 | - | - |
2.0 HP | - | 108 | 99 | 90 | 80 | 69 | 51 | 31 |
2.5 HP | - | 120 | 111 | 102 | 92 | 80 | 67 | 52 |
need to replace jacuzzi mag force pump #34227115. 04/jun/99, aparrently has been discontinued, what should I get?
Reply
Hello Patricia, thank you for contacting INYO POOLS. Based on the model you had we would recommend the Waterway Champion 2.0 HP Full Rate EE Pool Pump - CHAMPE-120. This unit would match the gallons per minute specs of the Carvin Magnum Force Pump 2 HP Pump.
Reply
I need to replace my Magnum 2HP pump. Is there a replacement for the 94027120?
Reply
Hi EC, We would suggest the 2 HP PureLine Prime as great replacement pump for the Jacuzzi Magnum, the plumbing ports on the PureLine Prime are not in the exact same spot as your current pump so you will have a little re-plumbing.
Reply
I have a Jacuzzi spa pump at the pool that requires replacement. Model no. Is 8-184951-02. It is a Magnetek type CX. what system replaces this unit?
Reply
Hi, Bob. You provided us with the Make of the pump and the motor number, we will now need the pump model or a picture of the housing..
Reply
I need to replace a Jacuzzi pump part number 8-184951-02 Type CX. It was installed in 1991 for the side spa at the pool. What part number replaces this pump?
Reply
Hi, Bob. You provided us with the Make of the pump and the motor number, we will now need the pump model or a picture of the housing..
Reply
I just installed 2hp magnum force pump I purchased. It keeps popping the breaker in my panel. What size breaker should it be running on. My previous pump was only 1hp was told it was 2hp. Is it possible that I need to upgrade my breaker
Reply
Hi, John. You will need a 25-30 amp breaker to operate this pump.
Reply
Woke up this morning, no pool running. Main pump tripped breaker, yikes not good timing! It is a Jacuzzi Magnum Force 2hp unit (2UMF-S), been leaking on the bottom for some time and finally shorted out the motor. The unit I want to order from you looks like a direct replacement...can you confirm? This one lasted 13 years so going with same seems a safe bet.
Reply
Yes, you are correct. This is the current replacement for the same model pump that you have.
Reply
I have a 94027125 jacuzzi pump with a ust1202 2hp motor , will the 94027120 replace my unit successfully?
Reply
If your pump using the motor model ust1202 has been working successfully then yes this replacement pump would work.
Reply
I have a 2 hp Carvin pump that the previous owner allowed to freeze and bust. Can I order just the pump and housing since the motor seems ok?
Reply
Hello, yes you could just replace those parts. I also recommend checking if your impeller and diffuser are in good condition. If they are not, you will have to get the ones based off of the motor that you are using.
Reply
i need to replace a pool motor plus pump.
The motor is a Century Centurion and the pump is a Jacuzzi - Magnum Force.
The manufactures label for the motor shows 2.0 HP, but there is also a label that shows Total HP = 2.4.
Question - what actual HP do i need? Thanks
Reply
Yes if you have a 2hp motor with a higher Service Factor then you would go with this unit. You can also go with Magnum Force V Series 2.7HP Variable Speed Pump (VMF-S2) - 94026140
Reply
Why is this pump with the dual speed motor so much more expensive? $399 for the single speed vs. $721 for the two speed!!!
Reply
Hi, David. The complete dual speed pump is a special order item. They are additional fees associated with special order items such as the Magnum Force Pump 2 HP Dual Speed Pump - 94027220.
Reply
The unit I need to replace has a 2HP, 115/230v, dual speed motor. Is your motor 2 speed??
Reply
Hi, David. The Magnum Force Pump 2 HP Dual Speed Pump - 94027220 is a special order item with a 3 week lead time.
Reply
How many GPM's does the 2 hp jacuzzi magnum force pump put out?
Reply
Hello Mark, depending on feet to head which you can run calculations for your personal feet of head under "How Do I Calculate Feet of Head for My Pool?" Once you figure your feet of head, according to 2HP Magnum Force GPM 2.0 HP would be 108 GPM for 40ft, 99 GPM for 50ft, 90 for GPM for 60ft, 80 GPM for 70ft, 69 GPM for 80ft, 51 GPM for 90ft, and 31 GPM for 100ft.
Reply
How many GPM does the magnum force Jacuzzi put out?
Reply
Hello Mark, depending on feet to head which you can run calculations for your personal feet of head under "How Do I Calculate Feet of Head for My Pool?" Once you figure your feet of head, according to 2HP Magnum Force GPM 2.0 HP would be 108 GPM for 40ft, 99 GPM for 50ft, 90 for GPM for 60ft, 80 GPM for 70ft, 69 GPM for 80ft, 51 GPM for 90ft, and 31 GPM for 100ft.
Reply
7-184949-22 1.5 hp (1.10 sf ) 230/115 3450 rpm jacuzzi pump looking to replace this unit. Jacuzzi 15UMF-S both units will the above work for me.
Reply
I have a Magnum Force 2HP Pump that is dated after 2004. I had to buy a new Jacuzzi motor last Summer and the motor is 2.65 HP. I my current Pump is not repairable, so I need to buy a new one. Should I get a 2.50 HP Pump or stay with a new 2HP pump
Reply
If you currently have a 2.5HP pump I would recommend seeing if your set up is going to function fine if you decrease the flow rate by purchasing a 2HP pump.
Reply
The Most Helpful Review
1 0
(5 out of 5 stars) Jacuzzi Spa Pump
Reviewed By: Larry from Sarasota, FL ()
Pros: Quick FREE shipping
Cons: None
When my spa pump failed after 12 yrs, I was told that Jacuzzi pumps were no longer being made and parts were unavailable. However, I found the all parts at INYO Pools, but then I found they had complete, brand new replacement pump for less cost than the parts! It arrived quicker than expected and has been installed and is working fine. Have recommended INYO Pools to my pool maintenance professional as a source for Jacuzzi parts Thanks
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Solid performer
Reviewed By: Kenneth S. from 30269 ()
Replacement for 12 yr old unit. Really only needed motor but easier to get whole thing. Watch for carrier damage as it is heavy and may slide around on truck. Mine had damage buy INYO took care of it no worries
Was this review helpful to you?
(5 out of 5 stars) Great Pump Value
Reviewed By: Steve M. from Houston, TX ()
Pros: cost, ease of ordering
Cons: none
This item is exactly as described online. Had an older version of this pump that had the motor fail after 12 years (pretty good). Priced the replacement motor but went with the entire replacement pump as the cost wasn't much more to get a new setup.
Was this review helpful to you?
(5 out of 5 stars) Jacuzzi Magnum Pump
Reviewed By: Francis R. from Toledo, OH ()
Powerful and quiet. really gets the job done
Was this review helpful to you?
(5 out of 5 stars) Ideal Replacement Pump
Reviewed By: Dr. Lawrence S. from TX ()
Pros: perfect match
Cons: none
Hard to find this make/model pump except at Inyo! It matches the 11-year-old pump perfectly, so it was very easy to install. Must also state that first shipment was damaged by carrier, but Joe Silva was very helpful and prompt in shipping a replacement pump along with a return shipping label.
Was this review helpful to you?
(5 out of 5 stars) Jacuzzi Magnum 2hp
Reviewed By: Charles B. from Kingwood, tx ()
Pros: Pump life, good design, solid construction
Cons: none
Bought this as a replacement for a 9 year old pump of same make and model. Could not ask for a better pump with great run life. No complaints.
Was this review helpful to you?