Which direction is the correct installed direction for this seal? Is the larger diameter "end" suppose to face the diffuser or the impeller?
Reply
Hi Dennis, The larger end faces away from the impeller.
Reply
can I run my magnum 1500 pool pump without a diffuser floating eye seal ? waiting for a replacement seal from pool company
Reply
Hi Perry, No, you cannot run the pump without the eye seal. If you do you will damage the impeller and or the motor.
Reply
Will this seal fit a inno-tech s7j and F569000? Is the eye seal suposto seat tightly against the impeler inlet shaft, becouse both of my pumps have at least 1/16 of an inch of space on all sides between the impeler inlet and eye seal, also culd this be the reson the jets barly put out any presure?
Reply
Hi, Brian. This Eye Seal will fit the S7J and F569000 Pumps. The Eye Seal should fit snug onto the impeller, a loose fit eye seal will not cause low water flow. You may want to check your filter to make sure it's cleaned.
Reply
Is the eye seal required on a J pump? I just watched a video from THE SPA GUY and when he assembled a J pump he did not install one.
IF one is required, what direction should it go in and how far should it go in toward the impeller.
Thank you.
Reply
Hi Ray, the larger side of the Eye Seal, 1/2-3hp Uprated (10146207r000) faces away from the impeller and towards the diffuser.
Reply
