Is there anyway you can just purchase they handle on the valve, the plastic handle for direction of the valve broke ....valve is okay . Thanks
Reply
Ray, You can find the replacement handle and other parts via Waterway Top Mount Valve Clearwater Parts.
Reply
Label on my filter valve is faded.
Hoe can I identify the valve positions?
Reply
Jim, If you look hard at the label on the "Waterway Top Mount Valve Clearwater/ Valve Lid Assembly" you can just make ot the 7 positions and their sequence. This link shows three pictures. The sequence is: bypass to pool, rinse, filter, bypass to waste, winterize, closed, and backwash.
Reply
After back washing the pool and returning to filter position , water pours out of the backwash hose opening on the filter. Would a new handle gasket fix this problem? If not what would you recommend?
Reply
Ken, Replacing the Valve Diverter With Gasket (600-9500) for this valve will fix your problem.
Reply
how can I tell what year our waterway 16 inch sand filter is ,We bought the filter in 2004 and I cant find a model # on it thanks Rick
Reply
Hi Rick, You can only tell if the manufacturer lists it on the unit or contact Waterway with the unit serial number.
Reply
I need to replace the valve on my 19" Proline sand filter and the only number that I could find is 718-1960. Would this be the correct replacement valve?
Reply
Hi, This valve is compatible with theClamp Assy - 718-1960 and if your unit was manufactured after 2001.
Reply
I have water coming out back wash ,I've replaced spider gasket twice and still same issue ,it's a pro line filter 7 position part#808-0043-N can I replace the 7 position valve or diverter w 6 screws and does it come w gasket already installed? I get very frustrated w this thing the gasket is 17 bucks each?? Any help
Reply
Hi Troy, You're not using the correct gasket. The gasket is not sold separately for this valve, you have to replace the Valve Diverter w/ Gasket (600-9500). You can also replace the Valve Lid Assembly (600-9600) or the entire valve, WVS002 (prior 2001) or WVS003 (after 2001).
Reply
Sand keeps flowing in after I rinxe and then go to filter---am I missing something?
Reply
Michelle, most of the time when we see sand going back into the pool this is due to a broken lateral. Here is a Video on How to Replace a Pool Filter lateral which you may find helpful. Also, we wrote an article on Sand Going Back in My Pool which shows other items to check.
Reply
Will this fit a proline p15153 22 inch sand filter?
Reply
Hi, This valve can fit most Proline sand filters, if you can provide the decal number from off of the valve we can confirm if this valve can be used a replacement.
Reply
I have a proline high rate sand filter model # FS022, and the valve assembly is leaking out the backwash port.. bought it in 2007 and manual shows multiport valve assembly part # wvs003n...will this fix problem and is your wvs003 the right part?
Reply
Hi Steve, Yes, replacing the valve will resolve the problem and the WVS003 is the correct valve for the FS022 filter.
Reply
I'm trying to find a multiport valve for my proline filter the number on mine is 808-0043N. I think the replacement is WVS003 but want to make sure
Reply
my sand filter says proline high rate sand filter Model P21554 i think from Namco???
the handle on diverter broke. it has part # 808-0043-n
need replacement top. thanks
Reply
My mutliport valve is cracked in several places on the top port. My number is 808 0043 wat 1208. Is this the correct part I need?
Reply
My mutliport valve is cracked in several places on the top port. My number is 808 0043 wat 1208. Is this the correct part I need?
Reply
Hi. This valve will work with model manufacturer after 2001.
Reply
My mutliport valve is cracked in several places on the top port. My number is 808 0043 wat 1208. Is this the correct part I need?
Reply
What is your filter model so I can identify the correct replacement for you?
Reply
I recently purchase a wvs003 replacement vailve. After installing it, it continues to leak to the point it drain my pool. When i tighten the colar it either slips on the threads or the joint is screw is not even. What should i do?
Reply
Hi, Ron. First I would recommend confirming you purchase the correct valve for your unit. Then make sure it's installed correctly.
Reply
My multi-valve port WVS003 has two openings in the front of it but your replacement part only has one. Is this really the correct replacement for a 1-1/2" multi-port 7 function sand filter valve?
Reply
Keith, The WVS003 has a total of 3 ports. The waste port pictured in the image you are looking at it on the opposite side of the other 2 ports.
Reply
i have a an outdoor pro 22 in filter with a valve part number 808-0043-re.1116, mnufactured in 2016 and it lists waterway plastics on the label. it appears this is a waterway valve unit so will this assembly work? i have two ports that cracked and need to replace the assembly.
Reply
Hi Justin, Yes this would be the correct replacement valve assembly for your 22" Waterway Sand Filter.
Reply
I have a cracked multi-port valve (808-0043-PB.0211) and I was hoping this is a compatible replacement. Will this unit work with my sand filter? Thanks!
Reply
If you have a Waterway Clearwater, or Carefree sand filter then yes this valve will work. If you are not sure what filter model that you have then please email us images of the filter and valve to upload@inyopools.com so we can confirm for you.
Reply
I have a Proline 808-0042-N.1008 7 Position multiport Valve (sand Filter) with a 22 inch. The handle snapped off and not sure what I should be buying to replace that piece. The pool was bought around 2010.
Reply
on valve positioner not snapping down so water is coming out of backwash port. can I lube positioner somehow to work smoothly?
Reply
I have a waterway 808 0043. 1008 clamp style multi- port valve that is bad I think we got it in 2009 its a sand filter can yo please tell me which one would replace that valve. thank you
Reply
I have a wvs003 multiple valve. No matter what position it's in, water comes out of the backwash drain. What's likely the problem.
Reply
Most likely you have a bad spider gasket and you will need this WVS003 Diverter w/ Spider Gasket
Reply
Needing to know what kind of spider gasket I need to replace in my filter. It has water coming out of the backwash when it is on filter. I am including pics bc I dont know what model # it is. It has numbers on it but I'm not sure what u need
Hi Dj, The spider gasket is only sold glued into the diverter. For your Waterway Eco Kleer Sand filter, you will require this Waterway Valve Diverter and Spider Gasket
Reply
i have a eco Kleer 22 sand filter. It has the numbers 808-0043 WAT 1208 on top of it. What valve do I need to replace it and what exactly do I need for installation?
It has really been on it's last leg this year not wanting to engage back to filter after backwashing with water running out of the backwash hose, and then the handle snapped off. Just wanting to know what all I need to get it back ship shape. Thanks.
Reply
looking for the correct spider gasket replacement for this filter
Hello - the correct spider gasket replacement for your Eco-Kleer valve is the Valve Diverter With Gasket (600-9500)
Reply
I have water flowing out of the backwash when it should be closed. Seems like the quick and thorough fix would be to replace the entire waterway. Is this the correct part? Mine is a Proline Sand Filter with 808-0043-N marked on the top. See attached pics.
Thanks,
Hi, Guthrie. Yes, this is the correct replacement valve.
Reply
Is there a gasket associated with the cage assembly at the bottom of this valve head? The part that mates with the stand pipe?
Reply
Hi, Gbl. The Yes, the O-ring, Multiport (Split-Nut Style) - 805-0435 is associated with the cage assembly at the bottom of this valve head.
Reply
Not the gasket that goes in between the valve body and the filter body...but is there a gasket between the standpipe and the cage assembly at the bottom of the valve assembly? Where the PVC slips into the valve...
Reply
Gbl, There is NOT an o-ring / gasket located there.
Reply
due you have part # 808-0043n ?
Reply
There should be a label on the side of your filter, could you supply us with the information from that label? Or take a few photos and supply to us? Simply click the reply link below to provide the requested information so we may make the appropriate suggestion.
Reply
how long til part is shipped and from where? Need a landed estimate time of arrival. Phoenix AZ
Robert
Reply
Hi Robert, there are a few locations that this valve could ship from and the delivery lead time is currently approximately 2-5 business days.
Reply
Do you guys sell the spider gasket for this valve? I have water coming out of the waste port no matter what position it is in and I'd like to try this before ordering a new valve assembly.
Reply
Here is a link to the spider gasket...Spider Gasket (711-1910b)
Reply
How long do you think it will be out of stock
Reply
Hi Erich, We actually do now have this valve in stock, so I would suggest ordering it now through the website as our inventory has been selling fast. Click this link here to order - WVS003 Replacement Valve
Reply
This part appears to be out of stock everywhere. Do you know if you will be getting more?
Reply
Hi Mark, we do not have an ETA on this valve. If you have leaking on your valve then I would suggest this Waterway Upper Handle Assembly 99% of the time this part will fix your issue and it is in stock ready to ship.
Reply
