How do I change the shaft seal on my pool pump?
Reply
Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
Reply
I am replacing a pump motor and seal on a Sta-rite pump labeled P2RA5E-1241......The 1241 suffix isa little fuzzy with only 24 being clear. What seal should I order?
Reply
Jerry,A prefix of P2RA will cross reference to the Dura-glas pump. The mfg made changes to the pump around 1998, so there are two different seals depending if you purchased your pump before 1998 or after 1998. You can view both on the parts breakdown.
Reply
my pump model is a sta rite self priming pump P6E6E-206L - WHAT SHAFT SEAL DO I NEED?
Reply
Hi David, The OEM Shaft Seal (37400-0028S) is the correct shaft seal for the Sta-Rite P6E6E-206L Pump.
Reply
My pump calls for the Seal part #37400-0028 instead of the seal #37400-0028S.
What is the difference between the part number with the "S" or without?
Thanks
Reply
They are the same part. There is no difference.
Reply
When you get your shaft seal and you mount the part with the seal, which end of spring goes on next, you have one end that flat metal and one with black plastic?
Reply
The spring part of the shaft seal is put on the shaft of the impeller with the metal touching the back of the impeller and the ceramic part of the shaft seal is placed in the center of the seal plate with the white pointing towards the impeller.
Reply
There used to be a copper cone that the pump seal went into, do you not use that anymore?
Reply
Did you get a shaft seal for a different model of Sta-Rite because that shaft seal goes to the Max-E-Pro, the models with the copper cone in the seal plate are the older models like the Dura-Glas (1 & 2) and Max-E-Glas (1 & 2)?
Reply
Hello folks at INYO Pools,
I have a Sta-Rite Max E Pro pool pump that may need a shaft seal replacement. The pump Model No. is P6E6C-204L, with a 1/2 HP motor. Can you please tell me which shaft seal I need for this pump?
Thanks!
Dave
Reply
what size shaft seal for a HYDROPUMP 3/4 HP salt water pool
Reply
Hello Brian. The U. S. Seal Manufacturing Pump Seal 201, Extra Heavy Duty Saltwater Pools model PS3868 would be the correct replacement motor shaft seal for the Pentair/ Pac Fab Hydropump saltwater pool application. PS-3868 Attached please find an exploded parts diagram for the Pentair/ Pac Fab Hydropump. Pentair / Pac Fab Hydropump
Reply
