?     Asked on 2/9/2017by John

Inlet/outlet on this valve 1.5"....I assume it'll work on 26" meteor year new was 1996
 Reply

A  Answered on 2/9/2017 by InyoPools Product Specialist Scott W.

What is the model of your filter so I can confirm that is the correct replacement valve.
 Reply


?     Asked on 6/14/2017by Andrew

I saw on the page for PAC FAB MPV 50118300 that this is a suitable replacement for a mid 90's vintage top mount PAC FAB Eclipse/meteor filter. Can you confirm that this valve will fit the 30" version of this filter? Is the flange size 8.22"?
 Reply

A  Answered on 6/15/2017 by InyoPools Product Specialist Patrick P.

Hi Andrew we are not showing that this valve works on the 30" Meteor. You will need this 50123100 30" Meteor Valve Replacement which has a flange size of 8.22"
 Reply


?     Asked on 6/24/2017by Pat

I have a 30" Eclipse sand filter Part #58930200 Serial # 05118 will this multiport valve fit?
 Reply

A  Answered on 6/25/2017 by InyoPools Product Specialist Hector F.

Yes, this valve will work with the Eclipse/Meteor sand filter. 
 Reply


?     Asked on 7/23/2017by TJ

Need to replace a Pentair 50118300 top mounted valve that is mounted on a PacFab 58930100 26" Meteor TM circa 1995-6. The mounting screw receptacles shape most closely match the the picture for the Praher 4600-1102. If the valve is obviously incorrect upon receipt, may I return for refund ?
 Reply

A  Answered on 7/23/2017 by InyoPools Product Specialist Lennox H.

Hi, TJ. The part you ordered and received can be returned if it's in new or unused condition. You can replace the entire valve with the TM-12-S8 or the Top Assembly Valve, 8 Way - 272528 
 Reply


?     Asked on 6/8/2018by Steven Smith

I have a 50118300 with threaded 2" pipe is this TM-12-S8 going to work for me and if it is 1.5 " can I reduce the 2" down
 Reply

A  Answered on 6/8/2018 by InyoPools Product Specialist Lennox H.

Hi, Steven. Yes, this TM-12-S8 Valve will work. you will need to reduce your plumbing from 2" to 1-1/2" connecting to the valve.
 Reply


?     Asked on 6/27/2021by Cheryl

I have Meteor Sand Filter, 26" 58930100. I have a leak on the lower part of the top mount valve. I am not finding the lower part separately. 1. It appears that the 12-S8 is the correct top mount valve, correct? 2. Do I need to purchase any gasket's/o-rings separately? 3. Do you have the clamp for this valve also as I should probably replace that too. Thank you!

 Reply

A  Answered on 6/28/2021 by InyoPools Product Specialist Patrick P.

Hi Cheryl, Yes this is the correct valve you will require and no other o-rings will be required. Unfortunately, we are currently out of stock the Meteor Clamp. The valve however is in stock ready to ship!
 Reply

  • Commented on 6/28/2021 by Product Owner

    Thank you for your response. Also, I haven't been able to find just the bottom piece of it. I replaced the handle part just a few years ago but it seems that the full piece is all I can find.
     Reply

    • Commented on 6/29/2021 by InyoPools Product Specialist Patrick P.

      Hi Cheryl, Yes you are correct just the bottom piece by itself is not available so the entire valve would be required.
       Reply