Does this pump fit pro line or waterway fco75 filter
Reply
Hi Dave, The SLR9 1 HP Pump Above Ground Horizontal Discharge (94022430) can work with your Proline/Waterway FCO75 Filter. You will need the S15uns Half 1-1/2" Slip Union, (31175607) for the connections.
Reply
what is the flo-rate GPM for this pump (SLR9)
Reply
Hi Tony, You can view the performance data of the SLR9 pump via the SLR9 Spec Sheet.
Reply
How to prime the pump.
Reply
Hi, You can review our How To: Prime a Pool Pump guide to see how to prime a pool pump.
Reply
I have a Jacuzzi Avalance DE Filter, will this be a good replacement for the pump that it currently has?
Reply
Hi Linda, The SLR9 w/ Horizontal Discharge is a good replacement that will work with the Jacuzzi Avalanche DE Filter.
Reply
Do you have a schematic for this with the dimensions and offsets to make sure it will fit my Splash Pak D40? Thanks
Reply
Hi Jeff, We do not have dimensions of this specific pump, but it will fit the Splash Pak DE40.
Reply
I need to replace a Jacuzzi S55CXPED-7500CAT, 115 volts, 9.5 amps, RPM 3450 2 speed self priming motor......will this work?
Reply
Hi Sally, This pump can be used as a replacement, however, no longer available in a 2-speed option.
Reply
I currently have a S1LRT9-3-LH pump on my Jacuzzi. I need to replace it. is the 94022430 pump that you have the proper replacement? or what is?
Reply
Good afternoon Mike, Here is a link to parts and motors Jacuzzi LR and SLR Series Parts
Reply
i have a s1-LR-6-S1 pool pump, the housing that holds the basket is cracked must i i buy the whole pump? It is a vertical setup what is your part no for that , 1 hp vertical?
Reply
Hi, Cynthia. You can replace just the crack housing with P/N 16-1120-05-R or replace the entire pump depending on how long you've had it.
Reply
Hello,
I have a 12 foot above ground pool, about 5000 gallons. My filter motor is going bad and making a loud noise because of a bearing. I am wondering the cheapest way to fix this. Should I replace the motor with a pump and basket? Will this motor work? I am attaching pictures and hoping you can help.
Thanks,
Hi, Mr. P. You can use the ClearBay - PD1100-6 as a direct replacement. This SLR9 Horizontal Discharge will require the Interconnect Self Aligning Union Assembly - 42363408R000
Reply
