I just bought a pack of these. Said it's for all Dolphins but I can't see how they will fit on mine. Do they come in different sizes?
Reply
These climbing rings only comes in 1 size and can be installed on all Dolphin Robotic Cleaners. You can call Maytronics at 1-888-365-7446 for installation instructions.
Reply
I have had the premiere for 3 mo and noticed that it does not climb the side walls all the way as it first used to. do i need to replace the soft white rollers?
Reply
Hi Michael, If the Climbing Ring are worn that can keep the cleaner from climbing the walls. You can replace them and see how the cleaner performs.
Reply
I have a Dolphin Apollo- has rotten climbing rings- each of them is 2-1/4" diameter (inner measurement) and the wheel itself is 2-1/4" inches. Are these the proper rings for that? From the pictures, they seem to be smaller on the inner diameter?
Reply
Hi Jeff, These Climbing Rings will fit the Dolphin Apollo Cleaner.
Reply
Will these rings fit the DX4? I think they will. Also, There are 4 black rubber "Feelers" made up of 3 flanges that scrape along the edges. They are mounted on all four corners of the side plates. Do you have those as well?
Reply
Hi Tony, These Climbing Rings will fit the DX4 cleaner. The corner bumpers are not sold separately, you will have to purchase the Side Plate.
Reply
are they hard to put on
are these the rubber pieces that helps it float on the bottom
Reply
Hi Kevin, These rings are not hard to install, they just slide over the wheel assembly into the space on the brush. You will have to soak them until they are pliable before installing. Click link >How To: Replace Maytronics Dolphin Brush for instructions. These rings help the cleaner move along the pool surface of the pool floor and walls.
Reply
can you give me directions on how to replace the foam rings on the dolphin supreme?
Reply
Hi Janice, You can view our How To Replace the Maytronics Dolphin Triton Combined Brushes for the climbing rings installation.
Reply
I know that you answered another question with "they will fit all Dolphin cleaners", but just to be sure b4 ordering Will they fit a Nautilus Plus?
Reply
Hello Kurt- The Climbing Ring - 4 Pack (6101611-r4) will work on the Nautilus Plus.
Reply
Are these climbing rings made of foam? I need a new brush with foam wheels for the Dolphin Deluxe 4. While in storage, rats chewed on one side of one of the brushes and chewed the foam wheel in two. Thanks!
Reply
Hi, Ken. These foam Climbing Rings can be used with the Dolphin Deluxe 4 cleaner along with the Combined Brush- 6101640.
Reply
how do I change the climbing rings only on my dx3?
Reply
Steps 1-10 of our Guide on How to Replace Maytronics Dolphin Climbing Rings outlines this process.
Reply
I have a dolphin diagnostic pool cleaner. It is a bit old but works fine. I want to replace the brushes. Does this model use climber rings? Do I need them? I do not see them around the brushes? Thanks!
Reply
Hi, Bob. You can use foam rings with this unit if you have a pool surface other than concrete. The Foam Rings - 6101611-R4 requires the Magenta Combo Diag Brush - 6101640 or you can use the Magenta PVC Brush - 6101604 which doesn't.
Reply
Can I use these on my Pentair Prowler Kreepy Krauler?
Reply
Hi. Yes, these Climbing Rings - 6101611-R4 will fit the Pentair Prowler 820 and 830 cleaner.
Reply
I'm looking for a part breakdown for a Nautilus CC Plus - I can find the Nautilus CC but not the Plus, which has climbing rollers and maybe other things
can you email me a parts breakdown?
Thanks
Reply
Hi John, Here is the parts breakdown for the Maytronics Dolphin Nautilus Plus. Hope this helps.
Reply
are there any soft spongy parts that are shaped like wheels? I found 3 inside one of the filter baskets
Reply
Hi. These are foam / spongy rings that are used with selected Dolphin Robotic Cleaners.
Reply
how to install
Reply
Hi, Russell. Check out our How to Replace Maytronics Dolphin Climbing Rings guide for installation instructions.
Reply
I have a Dolphin DX6 I purchased 3 years ago. I run it all a lot and leave it in my concrete salt water pool during the summer. It has the cloth bag. I would like to convert it to the new filter instead of the bag and replace the brushes and white foam rings as they are wearing out. Could you confirm the 3 parts I need?
Reply
The BOTTOM LID CARTRIDGE ASSEMBLY & 4 FILTERS, 5-7/8" TALL (9991414-ASSY), the Climbing Ring - 4 Pack (6101611-r4), the Pvc Brush, Gray (6101635) Set of 2 Halves, the BRUSH WB, DYN, PAIR (9995560-ASSY), and GRAY BRUSH, COMB DYN (6101656) are all needed. The parts page can be viewed here http://www.inyopools.com/parts_maytronics_dolphin_dx6.aspx
Reply
I have the Dolphin M200 and need new climbing rings for it. Is this one the right one (#3295-457) or is there another that is?
Reply
We, unfortunately, do not carry parts for that model Dolphin. You can always confirm directly with the manufacturer Maytronics at 1-888-365-7446 as to what part number that you would need.
Reply
How do you replace climbing rings on a Dolphin Premier?
Reply
Hi. You can view our How To Replace the Maytronics Dolphin Combined Brushes for the climbing rings installation.
Reply
how do I replace the climbing rings
Reply
Hi, Ben. You can view our How To Replace the Maytronics Dolphin Combined Brushes for the climbing rings installation.
Reply
Hi, i have recently aquired a supreme m4 but its struggling to climb the walls. I have large wonderbrushes fitted (tiled pool). Do these foam rings fit these brushes like on pvc brush counterparts? Thanks
Reply
Hi, Jesse. Unfortunately, they will not. The Wonder Brush is made using the same material as these climbing rings.
Reply
Are these the rings for the Dolphin Supereme M3?
Reply
Hi, TMac. Yes, these Climbing Ring - 4 Pack - 6101611-R4 will fit the Dolphin Supreme M3.
Reply
