Pvc Brush, Diag, Magenta, SINGLE (6101604)

$21.99

IN STOCK

Part # 3295-088

By Maytronics


Details

Top

Part # 3295-088

Manufacturer Code 6101604

Dimensions 12-5/16" X 6-1/2"

Alternate Part #'s 6101604, 87-111-1094, DL6101604, MAY6101604

Product Description

THIS IS A SINGLE BRUSH, 3295-435 IS A COMPLETE SET OF 2 OF THE SAME BRUSH

****************************************

INYO # 3295-088 MAYTRONICS # 6101604 GENERAL DESCRIPTION: THIS IS THE PVC BRUSH USED ON SOME DOLPHIN CLEANERS. THIS WRAPS AROUND THE WHEEL TUBE. THE SHAPE IS RECTANGULAR. THERE ARE 13 SQUARE TABS EXTENDED FROM ONE SIDE, EACH WITH A SMALL HOLE. THE OPPOSITE SIDE HAS 13 MATCHING MALE EXTENSIONS. ONCE THE BRUSH IS WRAPPED AROUND THE TUBE, THESE EXTENSIONS FIT THRU THE CORRESPONDING HOLE ON THE OPPOSITE SIDE TO HOLD THE BRUSH IN PLACE. MATERIAL: VERY FLEXIBLE RUBBER-LIKE PVC COLOR: BLUE DIMENSIONS: LENGTH: 12-5/16" (A) WIDTH: 6-1/2" NOT INCLUDING THE RECTANGULAR TABS (B) THE TABS SQUARE 3/8" X 3/8" THICKNESS: 7/8" MARKINGS: "DOLPHIN MAYTRONICS" IS VERY LIGHTLY MOLDED INTO THE NON-BRUSH SIDE

Top

?     Asked on 5/27/2020 by Paul Langer

Hello: My pool cleaner is quite a few years old. On the casing it says, "Dolphin Diagnostic Advantage" it is blue and pink. Is this the correct roller brush replacement? Pvc Brush, Diag, Magenta, SINGLE (6101604) Do I need four of these to change all of them or do I need two? Thank you. Take care, Paul
 Reply

A  Answered on 11/3/2020 by InyoPools Product Specialist Hector F.

Hi Paul, yes this is the correct brush for the Maytonics Dolphin Diagnostic Advantage pool cleaner and you will need two of these. 
 Reply


?     Asked on 7/20/2017 by Steve McCoy

I purchased this Brush for my Dolphin from the parts blow up schematic but upon receiving it realized that it does not have the 2 slots for installing the white climbing wheels that I also later ordered. Do you sell the correct one for my model? thanks
 Reply

A  Answered on 7/21/2017 by InyoPools Product Specialist Lennox H.

Hi, Steve. The Brush that requires the climbing rings are p/n 6101640.
 Reply


?     Asked on 2/1/2012 by Guest

I need a part for my Dolphin pool cleaner but I don't see it on the parts breakdown. Is there still a chance you may still have it?
 Reply

A  Answered on 2/1/2012 by InyoPools Product Specialist Patrick P.

The manufacturer which is Maytronics, does not offer all parts for sale. If you don't see a part on the breakdown you can give us a call. For parts that they do not consider "DIY (do it yourself), you will need to contact them and send in the cleaner for repair.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)