What is the warranty on Power Supply Part No. 9995671? Thanks
Reply
The power supply has a 6 months warranty from manufacture
Reply
Is the the same as the 9995678 that I have on my Dolphin 4 Deluxe?
Reply
Nora, The correct power supply replacement for your Dolphin cleaner is p/n (9995678-US-ASSY)
Reply
my power supply is a 9995675 witch supply should I replace it with
Reply
Hi Jerry, The Power Supply DYN USA 2010 (9995675-US-ASSY) will be the correct replacement power supply.
Reply
Our Dolphin cleaner only runs for 10-15 seconds, would that be the power supply or the cord that needs replacing?
Reply
Hello Mike, You might try and call Maytronics 888-365-7446 to run a diagnostic.
Reply
Does this come with cord from power supply unit to wall outlet?
Reply
Hi Dennis. The Power Cord - 5898412LF is not included with this power supply it's sold separately.
Reply
what does it mean when the bag light comes on? Power supply works but the dolphin cleaner wont come on.
Reply
This usually means the bag is full, and needs to be emptied.
Reply
what do the run settings 1,2,3 mean?
Reply
Hi, Dan. The LED 1 – The robot will automatically work every day for a full cycle – 7 times a week. LED 2 – The robot will automatically work every other day for a full cycle – 3 times a week. LED 3 – The robot will automatically work every 3 days – 2 times a week.
Reply
Will a maytronics model 9995671 work in place of model 9995678?
Reply
Hi, Gary. It will not, those power supplies are not interchangeable.
Reply
My power source on my Kreepy Krauly 820 fell into the pool. The robot is about 3.5 years old. Trying to figure out if it makes more sense to buy a new power source, or just buy a whole new robot and power source?
Reply
Hii, Nathan. Replacing just the Power Supply will be better than replacing the entire unit. Based on the usage the unit may need a tune up.
Reply
what is the correct power supply replacement for 9995672
Reply
Good morning, the part number 3295-494 is the replacement power supply for most dolphins.
Reply
My dolphin power supply 9995671 was blown into the pool by a sudden tornado type wind while it was plugged in. I drained water and dried it out. It still trips breaker. Are there any serviceable parts in the power supply? And could the robot have been damaged?
Reply
Hi, Tim. Unfortunately, replacement parts to fix your unit is not available. The unit will have to be replaced.
Reply
Does this power supply work with the Nautilus cc plus?
Reply
Hello Dennis, The correct power suppy for the Maytronics Dolphin Nautilus Plus is on this link here
Reply
My power supply fell into the pool.... Ugh Will this Power Supply work with the Dolphin Edge?
Reply
Hi Eric, the correct power supply for the Maytronics Dolphin Edge robotic pool cleaner is part number 9995678-US-ASSY.
Reply
Will this unit work for an M3 Supreme Dolphin? It is not listed.
Reply
Hi Kim, the correct power supply part number for the Maytronics Supreme M3 robotic pool cleaner is 9995672-US-ASSY.
Reply
Which power source do I need for model 99956034?
Reply
Hi Cindy, the replacement power supply for the model 99956034 is part number 99956034US-ASSY. This currently looks to be a special order which on average is approximately 2-3 weeks lead time.
Reply
