How can I be sure your 40' by 20' standard mesh cover
will fit or line up with or fit my existing anchor sites established for my previous 20 x 40 loop loc solid cover?
Reply
Hi. Sean Mcneill. This cover anchor will not match your Loop-Loc cover anchors. The only way to guarantee that a replacement cover will match is to use your existing cover as a template to make the new cover. You can contact our office at 407-834-2200 to make arrangements if you would like.
Reply
Our inground pool is 19 1/2. X 37 1/2. We currently have a loop loc cover. Replacement is too expensive. How does your cover compare to a loop loc? Would the 20 x 40. Work for us? Is there a warranty?
Thank you!
Reply
Hi. This cover meets and or exceeds all standards so it's just as good as the Loop Loc covers. However, the anchor spacings are different and this cover will NOT work for your pool.
Reply
what is the difference beside color of this cover PL7440 & PL7442. Are they both made by Blue wave?
Reply
The only difference between these two covers is the color and they are both manufactured by Pureline.
Reply
what is the difference between your pureline pl7440 and pl7442 covers?
Reply
The only difference between these two covers is that the first one is green and the second is blue. Also, currently the blue is out of stock.
Reply
Our pool is oval, and has only 2 feet concrete on side, and a diving board on another. Will this cover work for our pool? Thank you!
For an oval shaped swimming pool we recommend filling out this safety cover form and send that into us so we can get you an estimate for the proper cover.
Reply
Replacing an existing cover. What are the dimensions between the cover fasteners?
Reply
Hello, being that you had an existing safety cover we would need this pool safety cover form filled out and emailed to upload@inyopools.com so we can accommodate a cover for you.
Reply
We have an inground pool. How do we install the hardware for this cover? Then does the hardware screw down into concrete during pool season?
Reply
Hi Theresa, here is a youtube guide for installing a safety cover that should assist.
Reply
We have a 40 x 20 pool with 5' more for stairs. Will your models fit? What do you suggest?
Reply
Your CHAT is not working. No SEND button.
Pool dimensions attached showing pool features.
Reply
Hi John, there may have been a server issue at that time however please use this custom safety cover form and submit it to upload@inyopools.com if you need further assistance.
Reply
Can I get lawn anchors with this cover and is there any additional cost?
Reply
Hi Terry, we do carry the safety cover lawn tubes.
Reply
We have a 20x40 in ground pool. Our winter cover is falling apart. How do we get a new cover that will match the in ground anchors we have ?
Reply
Hi Rick, in order for us to accommodate your cover to match your current anchors we will need this custom safety cover form filled out and sent in to us at upload@inyopools.com
Reply
Do you sell a 22 X 44 mesh cover that straps down?
Reply
Hello Bob, thank you for contacting INYO POOLS. Please fill out and send in our CUSTOM SAFETY COVER MEASURING GUIDE. Please allow 3-5 days for a quote.
Reply
I"m looking for a 22 X 46 mesh cover as the one described. Do you offer that?
Reply
I recently bought a pool cover from your company. I need a better illustration of how to connect the straps to the springs. The picture in the small instructions is too hard to see clearly enough. I need a larger illustration or a video.
Reply
Good afternoon,Here is an INSTALLATION & MAINTENANCE INSTRUCTIONS FOR RECTANGULAR AND CUSTOM COVERS
Reply
Do you custom make 9x17 pool safety covers? if so how much would they cost?
Reply
Good day, For custom sizes please fill out our CUSTOM SAFETY COVER MEASURING GUIDE and return for a quote.
Reply
MY POOL IS A 18,BY 36, WOULD A 20 BY 40 COVER WORK GOOD. THAT WOULD COVER OFF SET STEPS. IN BLUE MESH
Reply
Good day,Based on the information provided we would recommend that you fill out and return our CUSTOM SAFETY COVER MEASURING form.
Reply
I am installing a 20' by 44' rectangle pool with a 3' love seat in the deep end & will be enclosing it in 3' of stamped concrete. How do I get a quote for a mesh safety cover for this pool?
Photo attached.
Thanks
-PL7442-5166f8b3-ec5c-489d-af54-d10791319c8f.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-PL7442-5166f8b3-ec5c-489d-af54-d10791319c8f.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "20' x 40' Rectangular Blue Mesh Safety Cover 18 Year (2 Years Full) - PL7442")
Good day, Izzy, here you will find the CUSTOM SAFETY COVER form you fill out and return to us. Please allow a few days once sent in for a quote.
Reply
Is this information available regarding the Pureline 20x40 safety cover? Part # PL7442
% Shade Rating
Tensile
PSI Burst Rate
GPM Flow Rate
Grid size
Hardware Included?
Reply
The cover was loaded with 485 lbs of weight (consisting of one 210 lb weight, one 225 lb weight, and one 50 lb weight distributed over approximately 1 ft2all within a 3 ft radius) at the center of the cover. Water was sprayed evenly over the Cover at a rate of 5.7 gal/min1for 30 minutes. The pool cover did not collect water during this period. The cover has a 92% UV rating and all install hardware is included.
Reply
i have an odd shaped pool in ground and. it has steps and an extension on one side extending v shape an extra 4 feet. Do you do custom covers? pictures if you do this??
Reply
Hi Roger, yes we can make a custom cover for you. Please fill out this custom safety cover form and send it to us at upload@inyopools.com so we can get you an estimate asap.
Reply
Hi, I have an inground pool i would like to buy a safety cover for. The previous owners apparently had a safety cover at one point because the clamps to secure it are in the concrete already but i do not have the old cover. Can you make a cover that will allow me to use the clamps that are already in the concrete?
Reply
Hello Dona, we can create a custom cover to match your anchor points. We would need a detailed drawing of the pool with the AB measurements.
Reply
hello, i have existing anchors in place and can supply a drawing / photo attached.
can you make a mesh safety cover for my roughly 18'X36' "L" pool ?
thank you!
-john
-PL7442.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-PL7442.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "20' x 40' Rectangular Blue Mesh Safety Cover 18 Year (2 Years Full) - PL7442")
Hi John, yes we can accommodate a mesh safety cover for you. Please fill out this custom safety cover measuring guide and provide the images to upload@inyopools.com and we can get you an estimate asap.
Reply
i have a 32 X 16 rectangular pool with additional area for steps going down into the pool going out
Can you still do a cover after getting you the exact measurements
Reply
Hello Rajinder, yes we can custom make a cover for you. Please fill out this custom safety cover measuring guide form and email it to us at upload@nyopools.com so we can accommodate one for you.
Reply
I HAVE A 22X12 KIDNEY SHAPE CAN YOU MAKE COVER I HAVE ONE NOW BUTLOOKING SHABBY ITS 12 YRS OLD
Good day, yes we would be able to create a custom cover for your pool. We would need our form filled out and returned.
Reply
1. How much over lap is cover 20 by 40 have?
2. What tools are needed to install?
3. Does rain water go through the mesh cover?
Reply
Good afternoon, the cover is 22 x 42 ft. There would be a 1ft over lap around the pool. You will need a hammer or core drill to install the anchors. Water would pass through this unit.
Reply
-PL7442-21a0767c-6495-4756-bb3c-cecd7ff945f7.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-PL7442-db167ff1-db12-4d74-b515-8f35955f8d40.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-PL7442-21a0767c-6495-4756-bb3c-cecd7ff945f7.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "20' x 40' Rectangular Blue Mesh Safety Cover 18 Year (2 Years Full) - PL7442")
-PL7442-db167ff1-db12-4d74-b515-8f35955f8d40.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "20' x 40' Rectangular Blue Mesh Safety Cover 18 Year (2 Years Full) - PL7442")