Is the LED that comes in this package a 18w or 35w? My pool had a 250w halogen. I want to be sure it will produce enough lite.
Reply
Hi Seth, This light here is the smaller 5 watt light that normally goes in a spa. If you need a larger pool light then any of the pool light fixtures on PureColors Light Page are 35 Watt.
Reply
I have an old American Products Spa Light that I need to replace. It's model 7711XX02 and is a 100 Watt 120 volt light. It is installed in a 7824 niche in a concrete pool. Will the PL5861 Spa lite be a direct replacement? Are there any others that will fit.
thanks
Franco
Reply
Is it UL listed?
Does it come with the copper screw for attaching to the housing like the Pentair version?
Reply
Hi. This fixture is UL Listed when installed in a compatible niche. The copper screw is included.
Reply
I have a Hayward sp-551-L does this light replace that light. I don't want to try and replace the Niche. I just hope this is a direct replacement.
Reply
Hi. This fixture is not compatible with the niche you have for the SP-551-L fixture. You will need to replace the entire fixture with the Hayward DuraLite SP570 Series Fixture
Reply
Can you recommend niche that are compatible with this light?
Reply
If you will be using this for a concrete, marcite, pebble tech or Diamond Brite installation then the proper niche is this Pentair Spa Brite Light Niche
Reply
I currently have a Fiberstar FX-SPA light 120V. I want to replace the fixture and bulb. I am unsure which niche is compatible.
It’s a concrete pool and looks like one of Pentair niche. Just want to be sure it will fit and can use the same mounting bracket with pilot screw. Also want it to work with standard on/off switch for color changing led.
I'm trying to replace a broken pool light with a modern LED one. I have an 'American' 77XXXX, 250 WATT, 120Volts, T-4. It sounds like I need to find a light that fits my existing niche. Photos attached. Is this light an option or would you recommend something else? Thanks.
Hi Ryan, Yes if wanted to go LED then you will need to replace your entire fixture and this PL5861 PureColors Light Fixture would be the proper replacement for the light in your photos.
Reply
My pool (built in the mid 90s) currently has 120v pool and spa lights made by Pac-Fab. I want to replace both pool and spa light with this LED bulb & Pentair fixture combo. Are Pac Fab niches compatible?
My spa light has a label that says "Fixture for swimming pool niche type number K-903662" and "Model 64-115x" and "use fixture housing #66-100x or 66-101x".
Thanks!!
Reply
Hi, J. P. The Pentair fixtures are compatible with the Pac-Fab niches.
Reply
My pool (built in the mid 90s) currently has 120v pool and spa lights made by Fiberstar. I want to replace both pool and spa light with this LED bulb & Pentair fixture combo. Are Fiberstar Jazz/FX niches compatible? My spa light has a label that says "Fixture for swimming pool niche type number Pentair 78241100-2300 & Pentair 78243100-4300. Thanks!!
Reply
We apologize for the inconvenience, however, we were unable to obtain an answer to your question from the manufacturer. We are unable to confirm this information. We suggest contacting the manufacturer directly.
Reply
My pool (built in the mid 90s) currently has 120v pool and spa lights made by Fiberstar. I want to replace both pool and spa light with this LED bulb & Pentair fixture combo. Are Fiberstar Jazz/FX niches compatible? My spa light has a label that says "Fixture for swimming pool niche type number Pentair 78241100-2300 & Pentair 78243100-4300. Thanks!!
Reply
Hi, Red. The Fiberstar Fixtures are compatible with Pentair niches. If you have a Pentiar niche which it sounds like you do based on the Spa info, you can use the PureColors LED Fixture Kit.
Reply
Will this model replace a Swimquip 5072.
Reply
Hi, Kevin. Unfortunately, it will not. You can use the SwimQuip Fixtures or the Color Splash XG Series LED Pool Fixture 120V - 50' - Polished SwimQuip Version.
Reply
Can you tell me which replacement gasket I need for a Pentair 7711XX02 pool light? (I am getting conflicting information). Are the #791208600 and #79108500 gaskets interchangeable?
Reply
I have a pool built in 1990 we are remodeling. I assume by the look of this light it will be a direct replacement for my existing light, but any identifying information on my existing light has disappeared.
My spa light is on an automated switch that turns on at 7:00 PM and off at 11:00 PM. Is this item going to turn on a different color every night, or can I set it some way that it is always just white light?
Reply
Hi, Jim. Unfortunately, it will not. The bulb will not work with the circuit being on a timer. You will have to install an On/Off switch.
Reply
I want to switch my Pentair 120v, 250W to LED. I don't understand how the colors are controlled. I am currently on an Aqualink system, and just comes on and goes of every night. Because the LED is switch controlled, does that mean every night it comes on it will be a different color than the night before until it cycles back to white? Can I get a more detailed answer? I spoke with someone there who was going to send me a copy of the manual, but it never came as promised.
Thanks - Jim
Reply
Hi, Jim. In order to control this LED fixture, the circuit will need an On/Off switch. The bulb will only change color by turning off/on the circuit within 2 seconds. PureLine PureColors LED 120V Owners Manual
Reply
