2 HP Round Flange 56J Up Rate Motor - PL2230

THIS PRODUCT IS NO LONGER AVAILABLE

Part # PL2230

By PureLine

  2 Average  

Details

Top

Part # PL2230

Warranty 2 Year

Dimensions 12-1/2" x 8-1/2"

Alternate Part #'s 1104375412, 12018, 1615Z-1-MC, 168096, 177021, 177172, 177983, 184983, 18498300, 186066, 193633, 5KCR39UN2824X, 5U143, 7-193633-24, 7-193633-74, 8-184983-21, 8-193633-24, 818498323, 9-177983-21, 90118589, 90118761, A0564400, B230, B230SE, C1320, CT120U, EB230, EUST1202, JD20UP1, JH20UP1, P724, SP-1615-Z1-MC, SP1615Z1M, SPX1615Z1M, UST1202, UST1252, V12018

Availability Temporarily Out Of Stock

Product Description

PureLine 2 HP Replacement Pool Motor for Hayward & Jacuzzi Pumps

Is your pool pump motor running loud, leaking or humming? These are all signs that it’s time to be replaced. The PL2230 PureLine Replacement motor is designed as a drop-in replacement motor for some of the most popular 2 HP pool pumps like the Hayward Super Pump, Hayward Super II, Hayward Max-Flo, Jacuzzi Magnum and many more.

The PureLine replacement motor is made of the highest quality components like sealed ball bearings which means it is an ultra quiet motor. Because of its high-quality construction, the PureLine replacement motor is backed by a full 2-year warranty.

When it comes to replacing your motor Inyo has you covered we have created a ton of resources to make this project a snap, like our Video on How to Replace a Pool Motor this video walks you through all the steps to replace your motor. Most of our customers decide to tackle this project on their own and by following our video they complete this project in about an hour.

When replacing your motor we highly recommend a tune up kit which includes all the seals and gaskets for your pump. Many times when you use your old seals you may have leaking and seal leakage is one item which will void the motors warranty so make sure to protect your investment with a tune up kit. Below we have listed the tune up kits for some of the most popular pool pumps.

Don't Forget Your Tune Up Kit

Hayward Super Pump Tune Up Kit
Hayward Super II Tune Up Kit
Hayward Max-Flo Tune Up Kit
Jacuzzi Magnum Tune Up Kit

Note: NOT California Title 20 Compliant. 

California Title 20 Compliant Options:

Product Specifications

Motor Name:
2 HP Pool Motor Round Flange 56J
Commonly Used On:
Hayward Super Pump, Hayward Super II, and Jacuzzi Magnum
HP:
2.0 HP
Flange:
Round
Speed:
Single
RPM:
3450 RPM
Volts:
115/230 V
Frame:
56J
Shaft:
Threaded
Amps:
20.4/10.2
Amps:
20.4/10.2 amp
Service Factor:
1.0
Top

?     Asked on 9/9/2019 by Ryan

Replacing a motor on Hayward model #SP3015EEAZ, is this the correct motor to replace it with? The current motor is UST1202 model K48M2N110C2. Thank you
 Reply

A  Answered on 9/10/2019 by InyoPools Product Specialist Joe S.

Based on the information provided you will need to order A.O. Smith 1.5 HP Round Flange 56J Up Rate EE Motor - UCT1152
 Reply


?     Asked on 7/8/2019 by Douglas Shelton

Will this motor replace my Hayward Super pump 2.0 HP? Current motor is a Century Model K48M2N111 Serial# 31913J2

 Reply

A  Answered on 7/8/2019 by InyoPools Product Specialist Joe S.

Good afternoon, yes if you have the K48M2N111 the 2 HP Round Flange 56J Up Rate Motor - PL2230 would be a replacement for it.
 Reply


?     Asked on 7/4/2019 by Amy

I need to replace a Century K48M2PA105C5 motor 2HP, 230V, 3450rpm, 10.4amps that is on my Hayward pool pump for the waterfall feature. Is this a suitable replacement?
 Reply

A  Answered on 7/10/2019 by InyoPools Product Specialist Matt S.

Yes, the PL2230 is a suitable replacement for the USQ1202
 Reply


?     Asked on 6/24/2019 by Philip Saluter

is this high or low head
 Reply

A  Answered on 6/24/2019 by InyoPools Product Specialist Matt S.

This is just a motor, it does not have a head rating. Only whole pool pumps would be rated for a certain category of total dynamic head.
 Reply


?     Asked on 6/22/2019 by Eric

We ordered this pump motor from Inyo. I have the motor installed but, it didn't come with wiring instructions for 230V. I have a black, red, gree (ground). No where on the motor is the typical 115/230v switch or instructions for wiring 115/230 Help!

 Reply

A  Answered on 6/23/2019 by PureLine

Eric, For 230v, the white and orange wires should be connected to the A terminal. Since you have 230v, your black and red wires are 115v hot. So either the black or red need to go to Line 1 and the other to Line 2. Your ground would be attached to the green ground screw.
 Reply


?     Asked on 6/19/2019 by Ronald White

Is this motor a replacement for my motor - it is US Motors 1081 Pool Motor, Cat No. EB809, Model K63CXERA-4768, HP 2.0, SF 1.20 RPM 3450, Volts 208-230, HZ 60, SF Amps 10.3-9.5, PH 1 Duty Cont, MFG L11C Frame 56J INS Class B. Thermally Protected AUTO Code G AMB c 50, Code 00D10 Made in Mexico EB809 , will replace myself if this one will work on my pool.

 Reply

A  Answered on 6/19/2019 by InyoPools Product Specialist Hector F.

Unfortunately, this motor will have a lower service factor so it would not be a match. You would want to go with the 5224A.
 Reply


?     Asked on 4/17/2019 by

Is your part the right replacement for the attached photo?

 Reply

A  Answered on 4/18/2019 by InyoPools Product Specialist Lennox H.

Hi. Yes, this PL2230 can be used as an alternate replacement. You will also need the Hayward Super II Pump Tune Up Kit - GOKIT2 or GOKIT2SALT
 Reply


?     Asked on 1/17/2019 by richard shafii

Is the shaft 3/4"?
 Reply

A  Answered on 1/18/2019 by InyoPools Product Specialist Lennox H.

Hi, Richard. The shaft diameter is .625". 
 Reply


?     Asked on 11/14/2018 by Lodewyk Steyn

Hi, Is this a suitable replacement motor for SP3015X20AZ. I currently have an Emerson T55CXJN-1348 2hp motor on there which locked up. What else would be needed for repair overhaul while I'm in there. The pump operates a saltwarter pool/spa. Regards
 Reply

A  Answered on 11/14/2018 by InyoPools Product Specialist Hector F.

Yes, this motor will work as a replacement motor for the model SP3015X20AZ pool pump. 
 Reply


?     Asked on 10/6/2018 by June E Byers

Hello, I need to replace a 2 HP Century pool pump motor Model K48N2Nn106C1. Do you know if this will be a match? Original pool pump is 15 year old Haywood. Not sure the model though.
 Reply

A  Answered on 10/10/2018 by InyoPools Product Specialist Hector F.

It seems as if you have an extra letter "N' in the model number and if so the actual two single speed options that you can use are the ST1202 or the UST1252
 Reply


?     Asked on 9/7/2018 by Remy

Will this motor work with a 120 volt intermatic timer? Is this considered a 120 volt pool pump?
 Reply

A  Answered on 9/7/2018 by InyoPools Product Specialist Lennox H.

Hi, Remy.  Yes, this motor will operate using 120 volts. 
 Reply


?     Asked on 7/17/2018 by Greg

When mounting the motor should the capacitor be on the top or the bottom?
 Reply

A  Answered on 7/18/2018 by InyoPools Product Specialist Hector F.

The capacitor that you see on this motor is to be facing up. 
 Reply


?     Asked on 6/9/2018 by nathan

Need replacement Hayward NorthStar 2 hp 208-230 SP1620-z-1-bns
 Reply

A  Answered on 6/9/2018 by InyoPools Product Specialist Alex V.

Nathan, based on your motor model number, you will need the SN1202 motor. Be sure to replace the shaft seal when you replace the motor. 
 Reply


?     Asked on 5/9/2018 by lcv

hi will this motor fit 12 year old super pump 2 with a 2hp motor? thank you.
 Reply

A  Answered on 5/9/2018 by InyoPools Product Specialist Hector F.

We would need to know the specific motor model, part or catalog number to confirm. If you cannot locate that information then you can email images of the pump to upload@inyopools.com and locate the impeller part number so we can assist further. 
 Reply


?     Asked on 5/6/2018 by Michael Ferro

I would like to upgrade Hayward Super II 1.5 HP pump motor #K48M2N110 with 2.0 HP pump motor, what motor # & seal kit #? The pump #SP3015EEAZ, would I also have to replace the impeller and if so what part #?
 Reply

A  Answered on 5/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Michael. The pump you have is already a 2 hp model. You have a 1.5HP Full Rate model which has a total HP of 2.25. The next size up will be a 2.7HP. You will need the B231SE - Motor, Impeller / Diffusser / Upgrade Kit - SPX3020CKIT, Impeller Ring - SPX3021R, and Tune Up Kit - GOKIT2 or GOKIT2SALT. Only make this upgrade once you've confirmed that your system can handle the additional water flow. 
 Reply


?     Asked on 1/19/2012 by Guest

I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
 Reply

A  Answered on 1/19/2012 by InyoPools Product Specialist Patrick P.

Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
 Reply


?     Asked on 1/18/2012 by Guest

I'm trying to find a replacement motor for my pool pump but my model number doesn't match what you have listed as the model number. My model number begins with a C48 and yours begins with an SP. Please help.
 Reply

A  Answered on 1/18/2012 by InyoPools Product Specialist Patrick P.

What we have listed on our chart pages is the pump model number. The model number you have will just identify the motor. If you look on the plastic housing on the pump there should be a sticker which will have the pump model number. You can usually find this by the discharge port on the pump. Once you locate it you can choose the correct replacement motor. Be certain to change the shaft seal and gaskets as needed. You can use our >How to guide if you need help. 
 Reply


?     Asked on 1/12/2012 by Guest

Why should I purchase a Tune Up Kit?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
 Reply


?     Asked on 1/12/2012 by Guest

Why do I need to purchase a new shaft seal?
 Reply

A  Answered on 1/12/2012 by InyoPools Product Specialist Patrick P.

We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
 Reply


?     Asked on 1/11/2012 by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply