PacFab Hi-Flow Valve 2" w/Spring O-Ring Kit - APCK1073S

$44.99

IN STOCK

Part # APCK1073S


Details

Top

Part # APCK1073S

Product Description

Kit Includes: 1: O-rings, 1: Gasket, 4: Washers 1: Spring, 1: 6 Gram Silicone Packet

Top

?     Asked on 5/5/2020 by Thomas E. Navickas

I have a pentair valve control #261050 2" sand - is this the correct replacement kit?
 Reply

A  Answered on 12/9/2020 by InyoPools Product Specialist Hector F.

Hi Thomas, yes this is the correct tune-up kit for the Pentair Hi-Flow multiport valve model 261050. 
 Reply


?     Asked on 4/28/2020 by Jerry Shoemaker

I would like to replace the valve portion of my pentair 27-2101 valve going into my salt filter. I would like to remove the 8 bolts, lift it out, replace the star gasket and put a new valve in.

 Reply

A  Answered on 11/4/2020 by InyoPools Product Specialist Hector F.

Hi Jerry, the top valve assembly for the Pentair valve model 27-2101 is part number 4623-20 and this kit has the spider gasket needed as well. 
 Reply


?     Asked on 4/1/2020 by Carlos Silveyra

will this fit a leaking Pentair 261142?
 Reply

A  Answered on 4/15/2020 by InyoPools Product Specialist Hector F.

Yes, this would be the correct o ring and spring kit for your model 261142 multiport valve.  
 Reply


?     Asked on 12/22/2019 by Donald Gilmore

Do these O-rings fin on a VLV Hiflo 2; P/N 261050?

 Reply

A  Answered on 12/23/2019 by InyoPools Product Specialist Lennox H.

Hi, Donald. Yes, this Hi-Flow Valve 2" w/Spring O-Ring Kit - APCK1073S is compatible with your model valve. 
 Reply


?     Asked on 7/22/2019 by John

I have a Pentair (?) valve cover with the part no. 272422, which replaced the original cover 2016. Is this the correct gasket for that valve?
 Reply

A  Answered on 7/22/2019 by InyoPools Product Specialist Lennox H.

Hi, John. Yes, this Hi-Flow Valve O-ring Kit - APCK1073S will fit your valve. 
 Reply


?     Asked on 6/23/2019 by Frank

I have a Pentair 27-2120 HI-Flow valve. Will this rebuild kit work on my valve?

 Reply

A  Answered on 6/23/2019 by InyoPools Product Specialist Lennox H.

Hi, Frank. Yes, this O-Ring Kit will work with your valve.
 Reply


?     Asked on 6/4/2019 by James Dean

I have a pentair 27-2120 multiport valve - will this work on my valve?
 Reply

A  Answered on 6/4/2019 by InyoPools Product Specialist Patrick P.

Hi James, Could you send us a few photos of your filter? A close of the label on the filter, a wide shot of the filter and a close up of the Valve label? To supply photos simply click the reply link below and upload your photos. Once we get any of this information we can make the proper recommendation.
 Reply


?     Asked on 4/22/2019 by LT

Where can I find the model number on my valve. It looks just like the ones in your picture
 Reply

A  Answered on 4/22/2019 by InyoPools Product Specialist Lennox H.

Hi, LT. The valve model or series number will be located on the valve decal. 
 Reply


?     Asked on 5/24/2018 by Bob Snodderly

I have a Pentair 27-2101 High Flow 2” valve, will this kit work for my application?
 Reply

A  Answered on 5/26/2018 by InyoPools Product Specialist Lennox H.

Hi, Bob. Yes, this O-Ring Kit w/Spring - APCK1073S is compatible with the Pentair 27-2101 High Flow Valve. 
 Reply


?     Asked on 5/23/2018 by George

I have a Pentair sand filter with a multi-port valve attached. I can't find any part or model numbers on the valve except the label that identifies the valve positions has the number 27-2101 Rev K. However this number doesn't cross with any Pentair models. Can the PacFab Hi-Low Valve 2" w/spring O-ring kit be used to refurbish the valve?
 Reply

A  Answered on 5/25/2018 by InyoPools Product Specialist Lennox H.

Hi, George. The Part #27-2101 cross references to the Label for the  Pentair - Pac Fab 2" Hi-Flow Multiport Valve. This kit is compatible with with the valve that you have. 
 Reply


?     Asked on 6/6/2017 by Chris Ermlich

Hi folks, It appears I have a Purex Triton valve. It says the Valve top assembly part number is 27-2422 and the paper states it covers assemblies 26-1049, 26-1050, 26-1142. Will this kit work on this valve ?
 Reply

A  Answered on 6/11/2017 by InyoPools Product Specialist Patrick P.

Yes this is the proper kit for your valve.
 Reply


?     Asked on 5/1/2017 by Fred

Will this repair kit work for my pentaire model 261130 1.5 hi flow valve
 Reply

A  Answered on 5/1/2017 by InyoPools Product Specialist Lennox H.

Hi, Fred. Unfortunately, this kit is not compatible with the 261130 valve.
 Reply


?     Asked on 5/1/2016 by Jon

I currently have a Purex Triton 27-2101 multi port valve for my pool, will this kit PACFAB Hi-flow valve 2" w/ spring and o-rings be able to retrofit my current systemm? Thanks, Jon
 Reply

A  Answered on 5/3/2016 by InyoPools Product Specialist Lennox H.

Hi Jon, This kit can be used with the PacFab Hi-Flow Multiport valve.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)