Part # QC1102
Warranty 1 Year
Dimensions 13.5" L x 7" W x 7" D
Alternate Part #'s 10-168887-06, 10-168887-86, 16359, 165888, 168887, 5KC38SN2510CX, 5KCR39UN6148X, 7-168887-06, 8-168887-06, AE100EH, AE100EHL, AE100FL, AE100FLL, B841, B864, B864SE, C1448, C1500, EB841, EQC1102, K48L2P100, K48L2P101, K48L2P101A1, K48L2PA101, K48L2PA101A1, K48L2PA105, K48L2PA105A6, K48L2PA105C3, K48L2PM100, K48L2PU100, QC1102, SQ210E, SQD10FL1E, 35-126-1174, AOS-60-5216, AOSQC1102
** PLEASE NOTE: Century has discontinued the B864SE 1.5 HP Up Rate motor. They recommend as a replacement QC1102 1 HP Full Rate motor. The effective horse power of these two motors is the same: B864SE 1.5 HP x 1.10 SF (service factor) = 1.65 effective HP; QC1102 1 HP x 1.65 SF = 1.65 effective HP. Inyo Pools is shipping the QC1102 as a replacement.
Century replacement motors for Pentair WhisperFlo, energy efficient, up rated pumps. Specifications: HP = 1, RPM = 3450, Voltage = 115/208-230, Amps = 16.0/7.8.0, Service Factor = 1.65, Frame = 48Y, Shaft = Threaded.
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Options:
Is the QC1102 a replacement for a AE100EHL motor? If so is it in stock and how long to ship?
Daniel,Yes, the QC1102 pool pump motor is a replacement for the AE100EHL pool pump motor. It is currently in stock and we typically ship our motors within 24 hours. We do not want you to have a green pool :)
my pond pump is A.O smith model K48L2PA101A1; QC1102 1 HP is dead. I need the same one to replace, and a seal or something else for that
Thank you so much.
Hi Huong, yes this is the correct single speed replacement motor for your motor model K48L2PA101A1. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Here are pictures of the motor I need. Please advise
I have told you twice and sent pictures the one you recommend is a round flange you can clearly see in the pictures mine is a square flange, would the 1 hp square flange 48y Full Rate EEmotor QC1102
I need a motor for my spa this is the Model number what can I replace it with. K48M2N118A2
I have a 1HP k48l2pa105. Is this the one? Do I need to also upgrade impeller as well?
my pump is a STA-RITE pump if that helps.
Thanks in advance!
Hi Jeff, this is the correct single speed replacement motor for the motor model k48l2pa105. You should not need to upgrade the impeller. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Why is this motor nmot allowed in Galifornia QC1102.
Hi Tovias, so there have been energy-efficient laws passed in the state of California regarding pool pumps. Here is a blog article that we put together that better explains those details called "California’s New Variable Speed Pool Pump Law"
How critical is it for water to travel from pool to heater and back to raise temp, both pumps are 2" in and out with 3450 RPM`s with same voltage, except one was a older 2HP and the new one is 1hp with a 1.65 s.f.
Hi. It is very critical to ensure that the unit functions properly and as intended. Heaters will not work without the proper water flow.
Need to replace my filter motor and received advice on your Chat line that is the proper replacement motor. Old motor is Max-E Glas II Model K48L2PA105 and seal plate has numbers P4E6E-151L.
Is it also necessary to replace the seals on the pump housing/seal plate?
Hi we are ordering a pool motor ao smith 1 hp glance 487 qc1102 do we need to order anything else for the installation .....ie like a sleeve
Hi, Charles. You will need to replace the pump shaft seal. To locate the correct replacement, you will need to provide us with the pump housing pump model.
A.O. Smith pump Mod. K48L2PA101A1 finally died. I am looking to upgrade to one of the variable speed motors. Can you tell me what pump and seal kit (If needed) would be ideal for me please?
The VS motor replacement that you would need is the model ECM16SQU. And for the seal kit, you will need to provide us with the model name or number of the front pump housing that the motor bolts to so we can cross-reference those seals. If you cannot locate that information then you can always send us an image of that to firstname.lastname@example.org so we can assist.
This looks like the replacement for my K48L2PA105C3 in my sta-rite max-e-pro. Is there a variable speed motor that matches this one that I could upgrade to? what seal kit do I need?
Is this compatible with the Sta-Rite P6EA6G-207L?
What is the energy usage difference between the older qc1102 and the ee b864se?
Hi. The Century B864SE Motor has been replaced by the Century QC1102 motor. The B864SE used 7.8-7.4/14.8 amps at 208-230/115 volts and the QC1102 motor uses 8.0/16.0 amp at 208-230/115 volts.
What the difference between this model and "1 HP Motor EE - Full Rate (B2841, B2841V1)"?
I have a Pentair Whisperflo WF-26 / 011773 / 1.5 HP / 1.65 S.F. HP.
Which one should I buy?
Hi. The difference between the QC1102 and the B2841 motors are the Frame size. The QC1102 has a 48Y frame which is smaller than the B2841 which has a 56Y frame. Either motor is compatible with Pentair Whisperflo WF-26. The Pentair Whisperflo Tune Up Kit GOKIT32 or GOKIT32SALT is the correct kit for that pump.
Tune Up Kit Starite P4E & P4EA Max-E-Glas II / DuraGlas II
Is this the correct tune up kit for the 1.0 HP Full Rate EE Motor (B864SE)
Hi John, The GOKIT38 is the correct kit if you have a Sta-Rite Max-E-Glas II & DuraGlas II pump. The motors info does not determine which kit you needed.
Intermittently working k48l2pa105, is there a capacitor to swap or just move forward with this motor for replacement?
I'm replacing my 20year old K48L2PA105 motor. Does this replacement come with a new shaft seal? If not, what is the part number. Thank you
Cory, The motor does not come with a shaft seal. The seal is dependent on the make and model of the pump housing not the motor.
Water got into the motor and rust formed on the inside of end cap of the motor,right where the motor shaft come through to impeller. Do you know where I can get new end cap? Bearing and everything else is OK!
I NEED A NEW MOTOR AND GOT THE FOLLOWING #'S OFF THE OLD ONE. MOTOR#K48L2PA105, MODEL#AE100FLL. CAN YOU TELL ME IF THIS IS FOR THE MOTOR SHOWING ON YOUR WEBSITE WHEN I PUT IT IN. IT DOESN'T ACTUALLY SHOW THIS #
I just finished replacing the shaft seal on my booster pump. As soon as I turned the pump on water was leaking from the shaft seal. Is it defective or am I doing something wrong?
Depending on the model, the installation of a booster pump shaft seal can be slightly different than a pool pump shaft seal. Some booster pump and pool pump shaft seals require that a silicone sealant be used on the outer areas of the metal seat of the shaft seal. The seal will need to be lightly hammered into the body of the pump. You can use a 1 inch PVC coupling or a piece of 1 1/4 inch PVC pipe and a rubber mallet. This procedure will apply to any pool pump or booster pump using a >PS-1000 style shaft seal.
I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
Why should I purchase a Tune Up Kit?
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Why do I need to purchase a new shaft seal?
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
What is Service Factor?
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
My pool pump was making a lot of noise and finally stop working time to replace I searched a lot places they wanted a lot money for it I find InyoPools.com and they where very helpful and they have the pump I was looking for also it’s my first time replacing my pump they send me a link video on how to replace the pool pump it was very explanatory and easy step by step video how ever I didn’t know what I did wrong my pump started to dripp water I call and they helped me by letting me know what I probably missed by letting them know what I did they where able to tell me that I needed to check for a sealer gasket as soon as I finish doing that I will post the outcome of my replacement of the pump so far InyooPools is been very helpful thanks InyooPoolsfor the help
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
(5 out of 5 stars) Pool Filter Motor
Reviewed By: DreamBigGoGreen from Bowie, Maryland ()
Pros: Customer service, shipping time, price and product
Cons: None that I can think of
Best of all is the wonderful customer service help provided by Inyopools. The product was here in the time specified and the price was considerably less than the 5 other companies I checked with first. The product was as specified and ordered and hasn't given me any problems to date. It was installed about a month ago.
(5 out of 5 stars) All pump and new pump
Reviewed By: ()
This motor pump is the replacement of my original B864SE is different model but exactly as my motor pump it was replace by QC1102 it has the same functions as my old motor pump I wish I could’ve take pictures but I was so excited to fix my pool pump that I just put everything together for my pool
(5 out of 5 stars) Outstanding customer service
Reviewed By: Ipaythebills from Marana, AZ ()
Pros: Great customer service
The pump was actually a warranty replacement part. Contacted customer service and sent the information they needed. I received the replacement pump before the end of the week. Thank you for the great service.
(5 out of 5 stars) Fits perfect
Reviewed By: Ipaythebills ()
Pros: Works great
Ordered this motor for my pool and it fit perfectly. I ordered the motor online with expedited shipping it was delivered exactly when promised and fit perfectly. It only took about an hour to install.
(5 out of 5 stars) Spa motor
Reviewed By: Mark K. from Utica, Il ()
Pros: High quality
My eighteen year old spa motor had a bearing going out. I was going to replace the bearing until I seen this fair price you were asking for this motor, it was almost twice that at the dealer. The motor was an exact replacement and runs quiet.
(5 out of 5 stars) Working Great!
Reviewed By: Wayne A. from Westminster, MD ()
Pros: good fit
Was able to easily replace motor of my original Anthony pump. Only slight gap around motor housing and pump, but causes no problem with operation. All important dimensions are OK. Quiet and efficient. Works very well.