Part # GOKIT44
Alternate Part #'s PL1044, ALDGO-KIT44, APCK1040
INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For More Pool Pump Motors
I HAVE A FLOTEC 1 1/2 HP POOL PUMP - MODEL #AT251501-01 - MOTOR #C48K2PA105...
WILL YOUR "STA-RITE TUNE-UP KIT" - DO THE TRICK AND FIT ON THIS SPECIFIC MODEL?
Hey John.Yes this GOKIT44 will work for your Flotec AT251501.
Hi, I have a sta rite model DJAFC-3103D that is leaking. Is this the correct kit for that pump? If not, do you have a kit for that pump? Thanks.
Is this the correct kit for A.O Smith SQ1202?
Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
My pump is making a loud noise and has loss suction in skimmer and filter, will replacing these pieces help?
Is this the right kit and is it okay to use in saltwater pools?
We have a Flotec Pump Model# AT251501-01. Our pool maintenance guy said we need to replace the Impellar & Diffuser Housing parts.
Can you please let me know which parts those are so I can purchase thru here?
I have a Sta-Rite 1 hp pump. Model number PRA6E 147L Code EOOZ.
I want a tune up kit for this pump. What one do I need to order.
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
4 to 8 hrs
Screwdriver, Adjustable Wrench
I replaced the pool motor following the video instructions! I didn’t know whether or not these parts were actually needed because I’ve never replaced a motor before, so I used these parts as needed following the video exactly as shown.
I didn’t want to put a brand new motor into my pump and use old parts of any kind. The only problem I had was that a couple of the o-rings didn’t fit correctly and I had to go to the pool store and get the right one!