AutoPilot OEM Replacement Salt Cell with Unions 5-Blade for up to 20,000 Gallons - RC35/22



Model # SC36

By AutoPilot

  4.8 Average  



Model # SC36

Manufacturer Code RC35/22

Alternate Part #'s PPC2, RC-28, 43-170-1030, APLPPC1, ppc2

Product Description

AutoPilot Salt Cell

AutoPilot SC-36 & RC35/22 Replacement Salt Cell

The SC-36 is the direct replacement for the older AutoLec RC-5 Cell. The SC-36 measures approximately 10.5" Long X 3" Wide (Without the unions). This product is also the replacement cell for the Soft Touch ST-36, Digital DIG-36 and the AP-150. SC-36 cells produces 100% pure sodium hypochlorite in your pool plumbing returning it to your pool. The Auto Pilot Chlorine Generator utilizes salt to produce chlorine for swimming pools. Please Note: AutoPilot has changed the part number from SC36 to RC35/22. The specifications remain the same.

  • Suitable for up to 28,000 Gallons with the Digital Nano; Up to 40,000 gallons with the Digital, 75003 or Soft Touch
  • Replacement for old AutoPilot model numbers RC-35/22 and SC-36
  • Cord should be replaced as well as cell

Click here for more Auto Pilot Chlorine Generator

Product Specifications

Treatment Capacity:
20,000 gal.

?     Asked on 5/3/2021 by Pete Santoro

Can this cell be used with a " Sun Touch Pool & Spa Control System? Also is the Sun Touch made exclusively for Pentair Cells or can/will other Cell brands work/w the Sun Touch. Thanks for your help...

A  Answered on 5/4/2021 by InyoPools Product Specialist Patrick P.

Hi Pete, This salt cell does not work with the Sun Touch. You would require this Pentair Intellichlor Salt System Page 75 of this SunTouch Installation Manual discusses how to wire the IntelliChlor to the Sun Touch. If you want less integration with your Sun Touch then you could go with one of these CMP Salt Systems.

?     Asked on 4/11/2019 by bob

is the autopilot DIG 220 usable with 110volt? Is it complete unit, can I wire it in to 110volt add my cell cord and good to go? From what I have been reading it is not that simple and that you do not include all that is needed with the unit. Last year you guys sent me the wrong cell for my system and after jumping through all kinds of hoops and sending many pics of my old cell and the cell you sent me you stopped all communications. what/ why

A  Answered on 4/27/2019 by InyoPools Product Specialist Lennox H.

Hi, Bob. The DIG-220 system can be wired for either 115 or 230 volts. As for the sending you the incorrect cell this matter was being handled by our supervisor. If the cell has not been installed arrangements can be made it have it returned. We will just need a picture of the sticker/label on the cell.

?     Asked on 4/7/2019 by bob

I purchased a replacement salt cell last year from InyoPools, cell SC36/RC35 with unions and never used it because it was the wrong cell for my system. I now need a new controller that will work with this cell, what do you recommend? Cheers, Bob

A  Answered on 4/9/2019 by InyoPools Product Specialist Patrick P.

Hi Bob, You would require the DIG220 Auto Pilot Power Center as well as the Auto Pilot Manifold Assembly and Auto Pilot Tri-Sensor You may be better off buying a Complete DIG36 Auto Pilot Salt System and keeping the cell you purchased as a backup

?     Asked on 4/18/2017 by

can this cell be delivered in miami and at what price

A  Answered on 4/18/2017 by InyoPools Product Specialist Scott W.

Yes, we deliver to Miami and the total cost for the cell and tax is $320.99.

?     Asked on 2/4/2017 by Cecelia Fonte

Is this the replacement part I need for my digital nano 220V-75041? I need one for 27000 gallons water.

A  Answered on 2/6/2017 by InyoPools Product Specialist Lennox H.

Hi, Cecelia. Yes, this Super Cell 36 Replacement Cell w/ Unions (RC35/22) is the correct replacement for the Digital Nano which can maintain a pool up to 28,000.

?     Asked on 1/16/2017 by Andy

I have a auto pilot , I have the super cell 35/22 how can I test it. My auto pilot blinks two red lights. I have cleaned it added salt the air temp is around 65 degrees at night and 75 to 80 during the day Thanks

A  Answered on 1/16/2017 by InyoPools Product Specialist Adam Y.

Good afternoon Andy, Have you ran a diagnostic test on it. After your salt ppm and your temperature. You will have a volt and amp check. what is yours?

?     Asked on 4/27/2016 by Michele

What are the prices for the PLC1400 and the PLC700 cell kit? Jandy

A  Answered on 4/28/2016 by InyoPools Product Specialist Hector F.

The PLC1400 kit is $709.99 and the PLC700 kit is $459.99.

?     Asked on 4/23/2016 by Michele

Is this replacement salt cell compatible with JANDY AQUA PURE MODEL: APUREM S/N C12RSAL10004

A  Answered on 4/25/2016 by InyoPools Product Specialist Lennox H.

Hi Michele, This cell is not compatible with the Jandy AquaPure system. You will need to get either the PLC1400 or PLC700 Cell kit.

?     Asked on 4/14/2008 by Guest

Does this cell come with unions?

A  Answered on 4/14/2008 by InyoPools Product Specialist Patrick P.

Yes this cell does come with unions.

?     Asked on 5/17/2007 by Guest

What is the warranty on the Salt Cell itself and the Power Supply?

A  Answered on 5/17/2007 by InyoPools Product Specialist Patrick P.

The power supply has a 2 year parts and labor warranty. During the 3rd year, 50% of parts cost is covered. The cell has a 2 year full parts and labor warranty. During the 3rd year, parts are covered at 50%. During the 4th year on the SC48 and SC60 ONLY, 25% of parts are covered. During the 5th year on the SC60 ONLY, 15% of parts are covered.

?     Asked on 2/19/2007 by Guest

Does your replacement cell SC 36 come with the entire manifold or is it just the cell? Do you carry the plug for the electric for this cell?

A  Answered on 2/19/2007 by InyoPools Product Specialist Patrick P.

The SC36 is just the replacement cell without the manifold, we do sell the entire manifold and cell together which you may view through this link The SC36 does not come with the plug, we do sell the 12 Foot plug separately which you may view through this link This plug is designed to be used with either the Soft Touch (ST) or Digital Units (DIG) We also carry this product in a 24' length which you may view here If you are just replacing your cell and the old cord is not bad you may use your old cord on the new c


Review Summary

 (Average 4.8  out of 5 stars)
5 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews