Integrated Control Board IDL2 (After-09/2004) - IDXL2ICB1931

$289.99

IN STOCK
FREE SHIPPING

Part # IDXL2ICB1931

By Hayward Pool Products

  5 Average  

Details

Top

Part # IDXL2ICB1931

Dimensions 7" L x 5" W x 4.5" D

Alternate Part #'s 47-150-1980, HAY-151-6904, HAYIDXL2ICB1931

Product Description

This integrated control board is designed to use with Hayward Universal H-Series Low NOx induced draft heater models H250IDL2, H350IDL2, H400IDL2 and also compatible with Hayward Universal H-Series Low NOx induced draft heater. New part incorporated on all IDL Heaters built after 9/20/04.

Top

?     Asked on 5/7/2021by LEONARDO CASIPIT

I have a hayward heater series h 400, (H400IDL2BH), there is no power light to the STANDBY, SPA, and POOL , any suggestions? Thanks
 Reply

A  Answered on 5/7/2021 by InyoPools Product Specialist Danny R.

I am sorry Leaonardo,  The best people to talk to on this one would be Hayward the manufacturer.  They could get someone out there to look at it.  I would just be taking guesses.
 Reply


?     Asked on 12/11/2020by Alfred KULHANEK

I have a hayward heater series h 400, the standby light will come on for a while then it will go off, any suggestions? Thanks
 Reply

A  Answered on 12/22/2020 by InyoPools Product Specialist Joe S.

1. Use the MODE button and place the heater in STANDBY mode. 2. Press and hold the UP and Down buttons at the same time. Wait three seconds. 3. The SPA indicator light illuminates and the display shows the current Max Temp Lock-out setting. 4. Use the up and down buttons to set the desired Max Temp Lock-out setting. 5. Press the mode button and the POOL indicator light illuminates. 6. Follow the same sequence as with the SPA settings above. 7. Press the mode button again to return to STANDBY
 Reply


?     Asked on 7/7/2020by Anthony

Will this board work in a Hayward h200 fdn?
 Reply

A  Answered on 12/14/2020 by InyoPools Product Specialist Hector F.

Hi Anthony, the integrated control board part number for the Hayward H Series heater model H200FDN is 6223-175.
 Reply


?     Asked on 4/4/2020by Tim Kleihege

is this item compatible with my Hayward universal LowNox H250FDN
 Reply

A  Answered on 4/4/2020 by InyoPools Product Specialist Patrick P.

Hi Tim, No this is not the proper board for the H250FDN. You will need this FDXLICB1930 - Integrated Control Board UHSLN which do have in stock ready to ship!
 Reply


?     Asked on 3/22/2020by Rick G

I replaced my heat exchanger for my Hayward H400FD I’m getting a HS code. After the code I put the temp sensor from the old unit in and the same result. I’m thinking my PSV3S valves are set wrong when I opened up the pool. Could that be the issue or ICB has failed?
 Reply

A  Answered on 3/23/2020 by InyoPools Product Specialist Lennox H.

Hi, Rick G. The issue could be caused by low water flow, if the thermostat is set above 108°F., clogged tube bundle and or a faulty control board. If your diverter valve is not in the proper position it can cause this issue. 
 Reply


?     Asked on 9/19/2019by Nick Hansarik

My Hayward h400 , flashes code AO with service light on. I checked to see if the blower was bad and it appears to be good? I’m not sure where to go next? I checked the plug at the circuit board and there is no power? I’m guessing it is the board then? Hayward Integrated Control Board - IDXL2ICB1931
 Reply

A  Answered on 9/20/2019 by InyoPools Product Specialist Lennox H.

Hi, Nick. That code can be caused by several issues including a faulty  Blower, Control Module/Ignition Board, Blower Vacuum Switch and or Gray Vacuum Tubing. A detailed diagnostic of all the components will have to be done to determine which one is bad.
 Reply

  • Commented on 10/24/2019 by Product Owner

    I did my diagnostic, the blower is not getting power from the control board. There is power to the control board and the blower runs with direct power to it. My current board has this number 1103042301, is this the correct board for a h400?
     Reply

    • Commented on 10/25/2019 by InyoPools Product Specialist Lennox H.

      Nick, I will need to know if you have the IDL2 or FD series unit. . 
       Reply

      • Commented on 10/25/2019 by Product Owner

        Where would I find the complete model number? To find out if it is FD or IDL2
         Reply

        • Commented on 10/29/2019 by InyoPools Product Specialist Lennox H.

          Nick, Removing the service panel, there is a tag that has all that info. 
           Reply

          • Commented on 11/10/2019 by Product Owner

            My heater says it is ILD2, so will this board work? Thanks for your help!
             Reply

            • Commented on 11/12/2019 by InyoPools Product Specialist Lennox H.

              Nick, Yes, this Control Board will work if your unit was manufactured after 09/2004. 
               Reply

          • Commented on 10/31/2019 by Product Owner

            It is an IDL2
             Reply


?     Asked on 7/13/2019by Mark

My heater Hayward h250 when turned on lights up service light and automaticity comes up HF error code checked voltage at gas valve there is no power going to it is there anything else to check or does that mean the board is bad
 Reply

A  Answered on 7/17/2019 by Industry Professional

Since you're not getting 24 VAC at the gas valve, you will have the replace the Integrated Control Board based on your model. 
 Reply


?     Asked on 6/27/2019by Tim Kleihege

Hi, will this board work with my Hayward H Series model H250FDN?
 Reply

A  Answered on 6/27/2019 by InyoPools Product Specialist Matt S.

Yes, this board is compatible with the Hayward universal LowNox H250FDN
 Reply


?     Asked on 1/9/2019by stecve

a local pool company told me that i need a new circuit board and a new blower in order to fix my h400IDL heater. All i can find are mainly parts for h400idxl . what is the difference and are the parts that i need interchangeable ?
 Reply

A  Answered on 1/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Stecve. None of the H-Series Low NOx model numbers ends with IDXL. You're getting the replacement part number and the mixed up
 Reply


?     Asked on 6/14/2018by Inyo Visitor

Will this boar work for an H350?
 Reply

A  Answered on 6/14/2018 by InyoPools Product Specialist Lennox H.

Hi. This Integrated Control Board - IDXL2ICB1931 is not compatible with an H350 Heater model. 
 Reply


?     Asked on 10/3/2015by Dean

My Hayward H400IDL heater flashes "SF" and he heater is not heating properly. Hayward. Hayward says it is my heat senor. If I replace my control board will this be the fix? Dean
 Reply

A  Answered on 10/7/2015 by InyoPools Product Specialist Lennox H.

Hi Dean, If the temperature sensor is not bad as the "SF" error code indicates then it could be a defective board. I would have a service technician inspect the unit to be sure.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews