Variable Speed Drive w/ Control Interface - SPX3400DR

$787.49

IN STOCK
FREE SHIPPING

Part # SPX3400DR

By Hayward Pool Products


Details

Top

Part # SPX3400DR

Alternate Part #'s sp3200dr, HAYSPX3400DR

Product Description

Variable Speed Drive w/ Control Interface - SPX3400DR

Top

?     Asked on 5/15/2021by Eric J Everitt

I have a SP3400VSPVR, I am getting a Heat Sink Overheat Error, According to a diagnostic sheet I need to replace the drive... is this the correct part?
 Reply

A  Answered on 5/15/2021 by InyoPools Product Specialist Danny R.

Hey Eric,Yes this the correct drive for the SP3400VSPVR Hayward pool pump
 Reply


?     Asked on 11/10/2020by Phil

Hello ny SPX3400 drive no longer works, which unit would I need? Thanks Sadly Phil

 Reply

A  Answered on 11/11/2020 by InyoPools Product Specialist Joe S.

Good afternoon, if you have the following HAYWARD ECOSTAR PUMP SP3400VSP SERIES then this would be the correct drive for that pump.
 Reply


?     Asked on 7/7/2020by Joe Parkinson

Do you sell this w/o the controller?
 Reply

A  Answered on 12/22/2020 by InyoPools Product Specialist Eric J.

Hello Joe, this part  SPX3400DR does not come without the controller i do apologize.
 Reply


?     Asked on 5/18/2020by John McLaughlin

I am looking for SP3200DRVR controler unit for my Hayward pump.
 Reply

A  Answered on 5/18/2020 by InyoPools Product Specialist Patrick P.

Hi John, This SPX3400DR is a direct replacement for SP3200DRVR controller. We do have this in stock ready to ship.
 Reply


?     Asked on 4/11/2020by Matthew Donnelly

i need a controller/display for a SP 3200. When looking for parts it often brings up 3400. are they interchangeable??
 Reply

A  Answered on 11/17/2020 by InyoPools Product Specialist Megan C.

The SP3200VSP and SP3200VSPND will use Hayward TriStar VS Pump SP3200VSP Series parts page http://www.inyopools.com/parts_hayward_tristar_vs.aspx 
 Reply


?     Asked on 4/7/2020by Ray

How difficult to swap out the drive assembly on the sp3200dr? Will I first need to disconnect the current entire pump or can I do it in place? And would the drive resolve the "stall" issue? Again the shaft is turning freely and pump malfunction was instantaneous, that is working perfectly fine until it just stopped. Thx.
 Reply

A  Answered on 4/8/2020 by InyoPools Product Specialist Lennox H.

Hi, Ray. Replacing the Drive Assembly is not difficult. The drive assembly can be replaced without disassembling the pump so it can be replaced in place. The issue could be caused by a faulty drive, motor, or both. 
 Reply


?     Asked on 4/6/2020by Ray

Does this part include the motor as well as the interface controller? Have t"stalled" SP3200DR". I am assuming due to controller chip on the board under the display. Pump is 5 years old connected in a really tight spot & want to avoid cutting pipes by slipping on new "back end" of pump and not touch pipe connections. Also are these refurbished parts or new? do you have a video for swamping this type of part? The one I found on Youtube from INYO seems to be much simpler model to repair..thanks.

 Reply

A  Answered on 4/7/2020 by InyoPools Product Specialist Lennox H.

Hi, Ray. This is the Drive Assembly only, the Motor Assembly - SPX3400Z1ECM is sold separately. These are new unrefurbished parts. We do not have a replacement video for this part.
 Reply


?     Asked on 9/17/2019by Scott G. Luther

I have a Hayward EcoStar SP3400VSP that dies last night with fault PUMP HAS STALLED. According to my package it came with an SP3200DR (thirty-two, not thirty-four). Is this SPX3400DR a replacement for my SP3200DR? (Thank you to the invaluable David Van Brunt from swimmingpoollearning.com for pointing me in your direction.) --Scott

 Reply

A  Answered on 9/19/2019 by Industry Professional

The correct drive for this is the SPX3400DR
 Reply


?     Asked on 9/13/2019by Pete

I purchased a Hayward SPX3400DRVR digital control interface, when I opened the unit there was a tag that says SP3200DRVR serial # 3VR19121-C03784, I am confused what did I receive ? Thanks Pete
 Reply

A  Answered on 10/15/2019 by InyoPools Product Specialist Michelle B.

Hello, I can look into this for you. Do you have an order number I can reference this by?
 Reply


?     Asked on 6/3/2019by Jim

which drive do I need for a Hayward sp3202vsp
 Reply

A  Answered on 6/3/2019 by InyoPools Product Specialist Lennox H.

Hi, Jim. This Drive Assembly is not compatible with the SP3202VSP, you will have to purchase the Power End - SPX3202Z1VSPE
 Reply


?     Asked on 5/22/2018by Brad

My model number is SP3200DR What motor drive do I need?
 Reply

A  Answered on 5/23/2018 by InyoPools Product Specialist Charlie R.

Brad, This is the correct motor drive unless your previous one included the safety vacuum release feature. If that's the case you need part # SPX3400DRVR
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)