Part # 6581
Dimensions 2.65" L x 1.35" W x 1.9" D
Alternate Part #'s JDY-30-6392, R0658100, ZODS30
This Jandy Relay is designed for use with the Jandy AquaLink system and can accomodate pool pumps up to 3 HP and pool equipment using up to 25 Amps. When using a dual speed pump in conjuction with an AquaLink system you will require a dual speed pump relay (Part # 6796) Jandy also has a special light dimmer relay available for dimming pool pool or spa lights (Part # 6587)
How much should i expect to have a professional install this Relay?
Hi Yolanda, Most pool service companies charge between $50 - $85 per hour and I would not expect this to take more than an hour to replace.
I have a Aqualink RS12 and a 3 hp motor. Will this work for my system? Any tips/precautions on installing?
Hi Clement. See our article on "Is a 1.0HP Motor the Same as a 1.5HP Motor?" and check your motor label for the Service Factor, or SF number. Multiply that by the horsepower of the motor to get the total horsepower. This relay will be fine as long as the total horsepower is 3HP or lower. These relays are pretty straightforward to install, but be sure to observe all local codes and have your local Building Department inspect it or have a qualified electrician install it to maintain safety for you and your family.