PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE

By Pentair Pool Products


Details

Top

Model # 78106200

Alternate Part #'s 56-102-1004, AMP-30-782, PEN78106200

Product Description

 

SPABRITE

The world standard of reliability for spa lighting

SpaBrite lights are available with either stainless steel or triple chrome-plated brass face rings. This energy-efficient light is perfect for spas and areas where space is not available for a full-size light. SpaBrite lights install in small plastic or stainless steel Pentair niches.

Features

  • Stainless steel face rings
  • Prismatic tempered glass lens
  • Stainless steel housing
  • Easy service stainless steel clamp
  • Halogen Lamp
  • Gold diffused low water cutoff
  • Easy to service
  • Plastic snap-on colored face ring covers available

Product Specifications

Cord Length:
100 ft.
Volts:
120 V
Watts:
60 W
Top

?     Asked on 10/16/2013by Guest

What is the total diameter of the face for this light?
 Reply

A  Answered on 10/16/2013 by InyoPools Product Specialist Patrick P.

The total face diameter is 6.00"
 Reply


?     Asked on 10/16/2013by Guest

Does the light come with a bulb?
 Reply

A  Answered on 10/16/2013 by InyoPools Product Specialist Patrick P.

Yes. This light fixture does come with a bulb.
 Reply


?     Asked on 10/16/2013by Guest

Is there a suitable LED Bulb replacement for the Pentair SpaBrite 120V?
 Reply

A  Answered on 10/16/2013 by InyoPools Product Specialist Patrick P.

Yes. The J&J Electroincs Color Splash Spa LED bulbs will work with this light. The part number for the 120V bulb is LPL70301102A.
 Reply


?     Asked on 2/16/2015by kerry stewart

How long is the warranty on this fixture?
 Reply

A  Answered on 2/17/2015 by InyoPools Product Specialist Robert M.

Hello Kerry - The warranty for the Pentair SpaBrite is one year.
 Reply


?     Asked on 5/19/2017by Greg

I have a Pentair 78241xxx/78242xxx wet niche in my spa. My Hayward color logic SP0533SLED100 filled with water now I have to replace it. My pool contractor never put in a junction box so I have to run it back to my pool panel 60ft away, only want to do this once so I can replace bulbs at the pool deck in the future. Will this 78106200 fit in my 78241/78242 wet niche? Considering this or the Hayward SP0591HSL100 with the J&J LPL70301102A.Thank you for your recommendation and advice.
 Reply

A  Answered on 5/19/2017 by InyoPools Product Specialist Megan C.

Hi Greg, Yes this will fit your niche, I would suggest the PureLine PureColors LED Bulb & Fixture which will also fit your niche.
 Reply

  • Commented on 5/15/2020 by Product Owner

    Thanks, but the item you mention is listed as being unavailable. Looks to me to be the same light fixture with a different bulb? I already have an unopened ColorSplash 3g I bought a while back that got packed away. I'll start with that for now. Cheers.
     Reply


Top
Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Wrench Set

Wanted LED Color to Match the Pool

Written on 5/10/2019 by Guest

First step was to drain the spa which was basically throwing a lever and sucking the water into the main pool.

Most important step was to splice the old cord into the new one. I made sure the splice was strong and streamlined (smooth). I was glad I did because it was a bit of a chore pulling the new cord through the conduit. Had a buddy feed on the spa end while I pulled. I would not do this job solo!

I also made sure there was enough slack in the line so I could remove the light and place it on the deck with the cord attached.

After RTVing the back of the cord pass through the whole thing went quick. As a precaution, I left the spa empty and dry to ensure the RTV set.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews