By Pentair Pool Products



Model # EC-620425

Warranty Ecommerce (EC) products: Products purchased from an Authorized Pentair Online Reseller (products beginning with EC-) receive a one (1) year (parts only) warranty from the date of purchase. The exceptions are: IntelliChlor cells and IntelliFlo SVRS pumps which receive a two (2) year warranty. EC products are not eligible for the bundled three (3) year extended warranty.

Alternate Part #'s 620425, EC620425, PENEC-620425, PENEC620425

Product Description

Dynamic Brilliance in a Compact, Easy-Installing Package 

Give your pool the ultimate lighting upgrade. MicroBrite Color and White LED Lights provide exceptional brilliance, lighting uniformity and amazing colors. For new pool and spa designs, their compact size delivers the freedom to add dynamic lighting in places never before possible. Let your imagination take you to brighter places!


  • The brightest, most vibrant ultra-compact white and colored LED light available.
  • Fits where others don’t. Just 3.5 inches long to fit into narrow walls and tight spaces.
  • Add visual excitement along steps, sun shelves, and in swim-outs. Or install facing up in water as shallow as 4 inches.
  • Versatile upgrade for many older fiber optic lighting systems
  • Premium-quality light with no shadows or hot spots
  • Connects to any Pentair automation system and the Pentair IntelliBrite® Controller - 600054
  • Fast and simple for professional installation. No niche required.
    • The MicorBrite Color light has seven pre-programmed color light shows or one of five selectable fixed colors. The MicroBrite Color light can be cycled through 14 settings - 7 party mode setting and 5 fixed colors - blue, green, red, white, magenta.

Product Specifications

12 V
Cord Length:
100 ft.
Light Color:
Color Changing
Pool / Spa Type:
Pool & Spa

?     Asked on 10/8/2018by Dale Campbell

How many of these in a pool size roughly 16'x32' (anticipate placing in side wall)

A  Answered on 10/10/2018 by InyoPools Product Specialist Joe S.

We would recommend 3-5 of these units to produce enough light for the pool.

?     Asked on 7/31/2019by Robert Bridge

It looks like all the colors are on. How do I change to only one color. I have the Pentair 600054. Help

A  Answered on 7/31/2019 by InyoPools Product Specialist Lennox H.

Hi, Robert. If changing the dial on the LED Controller did not allow the light to also change, there must be a communication error.

?     Asked on 8/18/2020by Anthony

I currently have Savi Melody lights, which were bought out by Jandy who now sell Hydrocool, except you can only buy them through an installer. I have Pentair equipment, so I'm wondering if the MicroBrite lights will fit the Savi melody fittings (which I think are just 1.5"). Is there any additional equipment required to work the lights? The Savi Melody lights work by turning them on and off and that cycles through the modes.

A  Answered on 8/19/2020 by InyoPools Product Specialist Lennox H.

Hi, Anthony. Yes, the Pentair MicroBrite - LED Color Light will fit into the same wall fitting as a Savi Melody light.

  • Commented on 8/19/2020 by Product Owner

    Do you have different length cables? I would need a couple of 50' and a 75' or 100'

    • Commented on 8/27/2020 by InyoPools Product Specialist Lennox H.

      Anthony, We do have this light in 50' - 620424, 100' - 620425, and 150' - 620426

?     Asked on 10/12/2020by Sharon

Hi I need two of these lights. I am having a professional install them. Do I need to purchase any other product other than this light for the install to be completed. We already have the Pentair system running our pool. Thank you.

A  Answered on 10/20/2020 by InyoPools Product Specialist Joe S.

Good day, Yes, this would all that is needed for the install. Connects to any Pentair automation system and the Pentair IntelliBrite® Controller - 600054.


Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Nut Drivers, Pliers, Wire strippers

Lightning strike

Written on 5/18/2021 by Guest

So a lightning strike zapped our pool lights (and a whole lot more) and we purchased 2 replacement lights. Disconnected power to the panel, tied a long piece of string to old light (wires) where it was wired to transformer, unscrewed old light from pool wall, pulled old light through pool (with string attached), tied string to new pool light wires, pulled string back through electrical box pulling wire for new light, screwed new light to pool wall, (did same for second light). Hooked new wires to new transformer (also zapped), re-energized sub-panel, turned lights on, and BINGO!, Bob's Your Uncle

Were these instructions helpful? 


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: