1. Home
  2. 342854

By Pentair Pool Products

Details

Top

Part # 342854

Alternate Part #'s PAC-10-478

Product Description

Superior hydraulic design delivers efficient, quiet operation

Pentair PINNACLE offers an unbeatable combination of performance, convenience, and long-term reliability. It features a strong, corrosion-resistant housing, an easy-to-open strainer lid, a large-capacity strainer basket, and the quiet, efficient performance you expect from a Pentair pump.

The Pentair PINNACLE'S hydraulic design effectively reduces friction and turbulence to increase efficiency and minimize noise. Pentair PINNACLE is available in 3/4, 1, 1 1/2, and 2 hp versions to fit a wide range of residential applications.  

Additional features include:  

  • Pump components are molded of thermoplastic for superior strength, durability, and quiet operation.  
  • Transparent strainer pot lid with comfortable handle for quick inspection and easy access to strainer basket.  
  • Large strainer basket extends time between cleanings.
    1 1/2" suction and discharge ports are reinforced for maximum strength.  
  • Unibody pump housing and low-profile molded base provide efficient operation in an attractive, compact unit.  
  • Unique diffuser and impeller provide excellent pressure performance across a wide range of flow rates.
  • Power end can be removed easily for service or winterizing without disturbing piping or pump support base.  
  • No tool required for removing thumbscrew drain plugs for draining and winterizing.  
  • Single-speed and two-speed models available.  
  • 1 year Warranty

Click here for more Pentair Pumps

Product Specifications

HP:
1 HP
Speed:
Single
Top
Ask A Question

?     Asked on 10/1/2021by Wigbert Siekhaus

1)I need a gasket set for the pump 34-2853 2) is the pump 34-2854 an exact replacement for 34-2853 and ...is it in stock? Is it in stock?
 Reply

A  Answered on 10/1/2021 by InyoPools Product Specialist Rich N.

Hi Wigbert.  We have this Tune Up Kit - GOKIT24 in stock for your Pentair/Pacfab Pinnacle pump.  It contains all of the o-rings you will encounter while rebuilding your pump as well as the important motor shaft seal.  The 34-2853 is a 3/4 horsepower Pinnacle pump and the 34-2854 is a 1 horsepower Pinnacle pump.  Unfortunately, neither pump is currently in stock.    
 Reply


?     Asked on 12/22/2019by stann vodofsky

what is closest replacement for Pentair pinnacle 34-2350 and 34-2355
 Reply

A  Answered on 12/23/2019 by InyoPools Product Specialist Lennox H.

Hi, Stann. The Pentair SuperFlo 1.5 HP Single Speed Pump - 340039 and SuperFlo 2 HP Single Speed Pump - 340040 can be used as replacements as far as the performance. 
 Reply


?     Asked on 5/25/2016by Robert Peterson

I need a direct replacement for a 342854 pump
 Reply

A  Answered on 5/25/2016 by InyoPools Product Specialist Lennox H.

Hi Robert, There is not a direct replacement for this pump, but the Pentair Challenger Pump (343233) will be the closest replacement.
 Reply


?     Asked on 6/7/2015by a arrastia

pump serial no. deteriorated, however the pump filter is 34-2351/PMP Pll P1HP ALMD. Need a replacement cost + shipping. ty
 Reply

A  Answered on 6/7/2015 by InyoPools Product Specialist Patrick P.

The Pentair Pinnacle Pump was discontinued and we would suggest the 1 HP Jacuzzi Cygnet Pump as a suitable replacement. The plumbing ports on the Jacuzzi Cygnet are at a slightly different height than the Pentair Pinnacle so some minor re-plumbing may be required.
 Reply


?     Asked on 3/16/2009by Guest

I need to replace my pump motor assembly for my pool and my existing pump-etc. is pacFab pentair pinnacle 1hp #342354 and this number is #342854 are these the same pumps?
 Reply

A  Answered on 3/16/2009 by InyoPools Product Specialist Patrick P.

The 342854 is the direct replacement for the 342354.
 Reply


  1. Home
  2. 342854