By Raypak



Model # R6450TI-E

Manufacturer Code 016015

Alternate Part #'s 016015, R6450TI-E, RAY016015

Product Description

Raypak Classic Series Heat Pump 119,000 BTU

Product Specifications

119,000 BTU
Coefficient of Performance:
5.5 kW
60 Hz
Minimum Circuit Ampacity:
Recommended Breaker Size:
Min Flow Rate:
15 GPM
Max Flow Rate:
60 GPM
310 lbs.
Heat Exchanger:
Heater Type:
Heat Pump

?     Asked on 4/24/2015by Alex

Hi, does this unit includes wiring/connectivity for remote operation and will it be compatible with Jandy iAqualink system for remote operation? Thanks

A  Answered on 4/24/2015 by InyoPools Product Specialist Lennox H.

Alex, This unit has the capability to be wired for remote use, however you will have to find out from RayPak or Zodiac if it's compatible with your automation system.

?     Asked on 1/3/2016by Rick

I have a inground pool in southern florida. Would the raypak R6250ti-e be suffencent enough to heat the water 80 degrees. The pool is 14'x28' average death is 5'. this would be for winter months average daytime temp. 75 degrees. Thankyou

A  Answered on 1/6/2016 by InyoPools Product Specialist Lennox H.

Hi Rick, The Raypak Standard 117K BTU Digital Heat Pump (R6350TI-E) will be sufficient to heat your size pool and maintain the water temp at 80°.

?     Asked on 2/18/2016by Naveen

I am planning to buy Raypak Model R6350ti for my 25000 gallon inground Pool. Do you think it will be enough. Also will the warranty be void if I install it myself. Moreover I have Jandy VFD pool pump and a chlorinator. Will this heat pump be able to communicate well with them. What other considerations should I have to have for this heat pump.

A  Answered on 2/23/2016 by InyoPools Product Specialist Lennox H.

Hi Naveen, This Raypak Standard 117K BTU Digital Heat Pump can be used to heat your pool, however the bigger the unit the faster it will heat your pool. This unit has to be installed by a licenses and insured company in order to uphold the manufacture warranty. This unit can be use with your current set up as long as the flow rate is with the operating range. You would need to install a check valve between the outlet of the heat pump and chlorinator to prevent any back-flow of chlorinated water into the unit. Please refer to the Raypak Heat Pump Owner & Installation Manual for all installation requirements.

?     Asked on 6/20/2016by Joe

Is this heater sized to heat a 18 x 33 above ground pool in CT?

A  Answered on 6/25/2016 by InyoPools Product Specialist Lennox H.

Hi Joe, This unit can be used to heat an 18'x33' above ground pool in CT, I will also recommend that you get  an Above Ground Solar Cover.

?     Asked on 8/13/2016by Inyo Visitor

Hi - I have a 20'x40' covered pool in Northern CA. Is the Raypak R6350ti large enough to keep the water around 80 - 82F? Thanks - L

A  Answered on 8/21/2016 by InyoPools Product Specialist Lennox H.

Hi, I will recommend the R8350TI-E unit which is the 133,000 BTU unit for your size pool.


Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Pliers, Wrench Set, Adjustable Wrench

1     1

My older pool heat pump stop heating,

Written on 3/7/2017 by Guest

I bought my new, and the heat pump came from Florida really quickly; we're in California and when the pump arrived to my house there was nobody to receive the heater. I called inyopools and they were very nice, there were able to store the heat pump in the truckers warehouse untill we come back. The heat pump was inmediatly delivered once I came back home and I have installed and enjoyed it so much, thanks inyopools! You are the best! God bless you and continue with the excellent bussines.
I also changed from chlorinated water, to salt water and it works perfect.
thank you very much.

Were these instructions helpful? 


Review Summary

 (Average 4.75  out of 5 stars)
12 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews