Part # PL0171
Dimensions 19" L x 9" W x 5" D
Alternate Part #'s 192330, 59001700, DEX3600DS, FC-9430, FC9430, PG-1903, PHG1836, 14-775-1030, APCPGR2, FILFC-9430, PG1903
Time to Replace Your DE Grids?
Our DE Grids are used on the most common pool filters including American Products®, Pentair®, Hayward® & Pac-Fab®. Most DE Filters will require 7 Full Grids and 1 Partial Grid. Typically DE grids last about 5 years so if it has been longer than 5 years then now is the time to replace your DE grids.
Things to Consider When Replacing Your DE Grids
Note: Collar has open slot (2 notches). Length is measured from one end of the grid to the other (collar not included).
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
have a 'old' Anthony pool filter mod.#ASDV336 has 8 fullsize grids w/bottom center manifold length 18'' . can you assist with correct replacements?
Hi, Joe. I was unable to find any info using that model number, please provide pictures of your unit. We may have a better chance that way.
I have an old Hayward Micro Clear D.E Filter model IS-DE2400-95
I need to know what filter element I need to replace all my element. There are 24 Sq. ft. or the 36 Sq. ft. ? Which one will fit my filter? I need to replace all of them. I do not want to replace just one or two and in one or two years or next clean up I another one to replace. Thank you in advance.
Hi, Bob. Based on your model number, the 24 Sq. Ft. Grid Pack (7 Full & 1 Partial) - FG1002PACK is the correct grids. However, to be sure you can follow the steps provided in our How to determine D.E. Filter Grid Size guide.
i have a old hayward filter bottom manifold 36 sq 18 by 11 one slot will this fit my filter
Hello, could you check the model of your filter or send us some pictures to better help you identify what type of Hayward filter you have?
at the top of the 8 filter grids, there's a cloth attachment in the shape of a tiny banana, or dick. What is this part. It's at the top of the grid assembly for DE filters. Mine has a hole in it and allows DE to enter pool Shaped like a pecker
Hi Mark, We will need to know the model of your filter or the p/n of the manifold in order to locate the correct air bleed sock.
(5 out of 5 stars) Just what we needed...
Reviewed By: Lisa B. from Harpers Ferry, WV ()
Pros: matched exactly
Cons: difficult to figure out which one we needed
After 8 years needed to replace our filter. The prices at INYO was cheaper than our pool supply company. Only difficulty was trying to figure out which ones we needed...but the guidelines given on INYO really helped to figure it out. Received the parts and they worked perfectly.