Part # PL0742
Dimensions 5-3/4" W X 4-1/2" H
Alternate Part #'s 272512, 4600-2512, PAC0618968, 27-110-1450, PAC-061-8968, PEN272512
Generic Replacement Top valve assembly for Pentair Top Mount 272512 valve
This is a Generic Replacement Top Valve for the Pentair 272531 Valve. This valve is most commonly used on Pentair Tagelus, Pentair Sand Dollar, Pentair Meteor and Sta-Rite Crystal-Flo II sand filters.
Commonly Used On
HI-FLOW MODELS 26-1124, 26-1130, 26-2506, 272523
PRIMARILY USED ON PAC-FAB (PUREX/TRITON SYSTEMS) TAGELUS FILTERS
USED ON PAC FAB 26-2506,26-1130 TOP MOUNT GASKET NOT AVAILABLE SEPERATELY . 5-11/16"(ROTOR) 4 SPOKE GASKET ..... DIMENSIONS OUTSIDE DIAMETER: 5-5/16" (GASKET) CENTER HOLE INSIDE DIAMETER: 1-7/16" (GASKET) .. 1-1/8" (ROTOR) SPOKE THICKNESS: 1/8" (SIDE TO SIDE) OUTSIDE RING THICKNESS: 1/8" (SIDE TO SIDE) TOTAL HEIGHT: 4-3/4" (ROTOR)
Will this fit Pentair Multiport valve 272526.
Reply
Hi Jay, the Replacement Valve Diverter w/ Spider Gasket for Pentair™ - PL0742 will be perfect for your Pentair - Pac Fab Top Mount 1 1/2" 26-2506 valve.
Reply
I have a Pentair P/N 261185, will this fit?
Reply
No, this is not the correct diverter for the 261185 valve. The correct diverter is part number 4600-1168.
Reply
I need a spider gasket for pentair 272599
Thank you
Reply
Hello, this is the correct part that includes the spider gasket as it is not sold separately for the model Pentair 272599 multiport valve.
Reply
Does this valve diverter w/spider gasket 272512 fit a Pentair 27-2599 6/98 - written on label on top, on side label is P/N 272526 VLV SD19/22 1.5" HiFLO?
Thank you,
Randy
Reply
Hi Randy, yes this is the correct replacement valve diverter w/ spider gasket for your Pentair multiport valve model 272526. Here is a general guide that we put together called "How to Replace a Spider Gasket on a Multiport Valve" that may assist.
Reply
Can one order the spider gasket for #272523 or will I have to order the higher assembly diverter valve to get it ?
Reply
Does this diverter assembly come with the O rings shown in the how to replace video?
Reply
Hi, Kellea. No other o-rings are included with this Diverter. Those parts are listed on the Pentair Hi-Flow 1-1/2" Parts Diagram page.
Reply
will this fit 6 way vlv asy 272523? my serial number is 0518344050005G. label also has container id 11642666 site E. i have some pictures of the valve and what is broken. i can send them to you, if you can give me a email id. thanks.
Reply
Hi Suki, Yes this valve Diverter with Spider Gasket does work with the 272523 valve assembly.
Reply
What is the part number for the matching spring assembly for this part?
Thanks.
Reply
I plan to order a new Diverter, Valve W/gasket {272512}. The video showed using Loctite 401, 403, or 416.
It also mentioned aSuper weatherstrip Adheasive. Do I need these two products for the seat of the gasket? And do you sell them? Thank you for your help.
Jim
Reply
Hi Jim, you don't need all of those items just one of the 3. We carry this Super Weatherstrip Adhesive that we suggest. Please note that the 272512 comes with the gasket already glued in so you will not need the adhesive.
Reply
How do you replace the diverter, valve w/gasket assy.
Reply
Here are instructions on How To Replace a Pool Multiport Valve Spring. The instructions focus on the spring, but the diverter valve is included in the replacement instructions.
Reply
The Most Recent Reviews
(5 out of 5 stars) Winner
Reviewed By: Inyo Customer ()
Was the exact part we needed
Was this review helpful to you?
0 1
(5 out of 5 stars) Replacement diverter valve
Reviewed By: Karen V. from Clovis NM ()
Pros: quailty and price
Cons: none
I have a 15 year old pool and was in a panic when I figured out that the gasket on my diverter valve was in need of replacement. That is when I discovered INYOPOOLS. I was able to order a new diverter valve with a built in gasket. The price was good, it arrived quickly and fit perfectly. The diverter valve was a quality piece and very easy to install. What more could I ask for. From now on all ov my pool needs will be purchased from INYOPOOLS.
Was this review helpful to you?
0 1
(5 out of 5 stars) The Right Part
Reviewed By: Coach from Northern Illinois ()
Ordered a gasket for the sand filter, but found out it did not fit. Talked with Joe at Inyo, and he steered me to the right part for my filter.
Was this review helpful to you?
0 1
(5 out of 5 stars)
Reviewed By: Jeremy ()
Worked great, solved a leak!
Was this review helpful to you?
0 1
(4 out of 5 stars)
Reviewed By: Dlorrah from Longview ,Tx ()
Great service, product as shown, no problems
Was this review helpful to you?
0 1
(5 out of 5 stars)
Reviewed By: Ricky R. from Longview,Tx ()
well built product,fast shipping and always the right price at INYO POOL!
Was this review helpful to you?
3 1
(4 out of 5 stars) Replacing a worn diverter
Reviewed By: Chuck S. ()
The part was received promptly in good condition and I installed it but with some difficulty probablymy fault. Removed the six bolts separating the top, the diverter was in clear view but it took me a while to realize that you had to turn the handle until the screw lined up with the special notch that gave access. Took it out and the diverter came right off.To get the newone on and reattached, you had to compress the spring, line up the hole, insert the screw and get it started. It became a two man job, but after that everything went smoothly, so some better instructions would have made everthing perfect, Thank you.
Was this review helpful to you?
0 1
(4 out of 5 stars) Pool part
Reviewed By: pool from Miami, FL ()
Pros: Quick
Cons: none
Shipment was prompt and price was very good
Was this review helpful to you?
0 1
(5 out of 5 stars) Diverter valve for sand filter
Reviewed By: Samuel J. from Maurepas, LA ()
Pros: Very easy to change.
Cons: Old one was a little difficult to get out.
Worked great. Sandfilter is not being bypassed now.
Was this review helpful to you?
0 1
(5 out of 5 stars)
Reviewed By: Sharon N. from Lucasville, OH ()
Web site was easy to use. Product shipped and arrived in a timely manner without costly shipping charges.
Was this review helpful to you?
1 0
(4 out of 5 stars)
Reviewed By: Michael L. from Kansas City, MO ()
Product works great,fits is fine.Only issue is compressing the spring to install the handle is quite the challange.
Was this review helpful to you?
0 1
(5 out of 5 stars) Great Replacement Part
Reviewed By: Pool Mom from North Louisiana ()
Perfect replacement for the original part, and priced right.
Was this review helpful to you?
0 1
(5 out of 5 stars) Sand Dollar filter valve with gasket
Reviewed By: R.K. L. from Seattle, WA ()
This part is absolutely necessary for the pool filtering equipment to work at all. It wears quickly, especially the rubber gasket, so there is a built-in future failure. However, it is great that the part is readily available through INYO Pools.
Was this review helpful to you?