$12.49

Qty:

By Aladdin


Details

Top

Part # 4701-10

Manufacturer Code O-322

Dimensions 6.39" X 0.75"

Alternate Part #'s 51018600, AMP0611111, HAY0613197, O-322, O322, SP-715-D, SP715D, SPX0715D, SPX715D, WC2022, 90-423-1322, AEQO322, ALDO-322-0, APCO2147, SPG-601-1155

Product Description

5-spoke spider gasket used in the Hayward 2" Multiport Valves SP715 & SP716 and Sta Rite Side Mount Valve WC212. 

Outside diameter 6-5/16"
Inside diameter (center hole) 3/4"

Frequently Bought with Spider Gaskets

RTV Silicone 6558-0 (for gluing gasket into the valve)

Top

?     Asked on 9/2/2014by Guest

Will replacing valve seat gasket stop the leak going to the waste/backwash line?
 Reply

A  Answered on 9/2/2014 by InyoPools Product Specialist Patrick P.

Yes replacing this spider gasket part o-322 should stop this leak. Be sure to clean the channel on the valve where the gasket sits. You can use silicone adhesive to help keep the gasket in place.
 Reply


?     Asked on 10/15/2014by Guest

Will this work with a Hayward Multiport valve, Model SP715A50, 2"
 Reply

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

That is the correct spider gasket for a SP715 model Multi-port Valve. There is also a kit that would include a new o-ring for the lid of the valve as well as the spider gasket - part number APCK1034. As long as you have the lid off, it may be a good time to replace that o-ring as well.
 Reply


?     Asked on 7/19/2015by Ken

I look for a gasket, model # WC212 - 150PN, SP715 - 2 SRW. of Sta-Rite.
 Reply

A  Answered on 7/19/2015 by InyoPools Product Specialist Dennis R.

Hi Ken, 4701-10 is the spider gasket for Sta Rite Side Mount WC212-150PN.
 Reply


?     Asked on 5/10/2016by Doug

I have a starite valve with wc212-94 on it. The measurements seem to match this spider gasket. Can you confirm the proper spider gasket for this valve. Thanks
 Reply

A  Answered on 5/12/2016 by InyoPools Product Specialist Lennox H.

Hi Doug, This Valve Seat Gasket is the correct gasket for the WC212 Side Mount Series Valve.
 Reply


?     Asked on 8/23/2016by Troy

Will this spider gasket (4701-10) fit my StaRite valve with mod. No. WC 112-147?
 Reply

A  Answered on 8/23/2016 by InyoPools Product Specialist Scott W.

What model of Sta Rite valve do you have? Is there a part number on the valve? If not, what model is the filter? And if you don't have any of that information you can send me a picture of the filter and I can identify it for you.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

After several back washes the gaskets get deformed and leak, often substantially.

Written on 7/15/2023 by Guest

I took apart the diverter and replaced the gasket. No more leak, YET.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Socket Set

1     0

The area that holds the gasket was leaking

Written on 4/14/2017 by Guest

The section where you turn the handle to filter/backwash/etc was leaking. I used a socket set to take off the handle part so I could get to the gasket. Unfortunately the gasket was underwater so it would have been immpossible to scrape it off (it was glued on) and silicon a new gasket on. I ended up massaging the original gasket back in to place and haven't had an issue since. The quality of the new gasket and silicon was very good - on par with OEM specs but, sadly, I couldn't use it.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
10 Rating
5 star:
 
(10)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews