By Hayward Pool Products


Details

Top

Part # 5110-07A

Manufacturer Code SPX1600AA

Dimensions 10" X 9.5"

Alternate Part #'s 35-150-2000, 76181957, B001EXHRO4, B003SR72EE, D3866F030DE18887, HAY1012009, PST-35-150-2000, SP1600AA, SPX1600-AA, SPX1600AA, SPX1600AA-U-A, SPX1600AA-U-B, SPX1600AA-U-D, SPX1620AA, HAYSPX1600AA, HPPSPX1600AA

Product Description

Pump Housing for Hayward Super Pump

Top

?     Asked on 5/24/2015by virginia burgess

i do not under stand 11/2or 2'' I NEED THE HOUSING WITH BOLTS IF YOU CAN HELP I WILL ORDER THANK YOU VBURGESS
 Reply

A  Answered on 5/24/2015 by InyoPools Product Specialist Patrick P.

Hi Virginia, this is speaking of the pipe size which is going into your pump. If you look at the pipes going into the pump there should be computerized writing on the pipe which says 1-1/2" or 2". The vast majority of Super Pump Housings are 1-1/2".
 Reply


?     Asked on 5/14/2016by Diane

I have a Hayward Model EC-65 System pool filter, in ground pool. I need this housing strainer, SP-2600 series The pump discharge elbow is SP-1485-B. Do you think that this well fit my filter ?? Thank You, Diane
 Reply

A  Answered on 5/16/2016 by InyoPools Product Specialist Lennox H.

Hi Diane, This Strainer Housing and the EC-65 filter can be used with the Pump Discharge Elbow (SPX1485B)
 Reply


?     Asked on 9/14/2016by roy

how do I measure the strainer basket to see if mine is 1 1/2 or 2 inches
 Reply

A  Answered on 9/14/2016 by InyoPools Product Specialist Scott W.

The 1.5" is the diameter of the ports in the pump housing so if it's the 1.5" the one you would get is part number 5110-07A, if it's 2" then it'd be part number 5110-07B.
 Reply


?     Asked on 9/27/2016by Rob

I sent a message yesterday and did not receive a response. I am looking for a replacement for my pump housing strainer part number SP2607x10. Could you direct me to the right part? Thank you!
 Reply

A  Answered on 9/27/2016 by InyoPools Product Specialist Stacey M.

Hello Rob, the 5110-07A part number is a correct replacement for the housing of a Hayward Super Pump SERIES 1600, 1600X, 2600, 2600X MODELS. The 5110-07A housing is for 1 1/2" pvc pipe.
 Reply


?     Asked on 3/26/2018by Robert

What is the part number to replace the strainer housing for a Century B129 1.5hp pump?
 Reply

A  Answered on 3/27/2018 by InyoPools Product Specialist Lennox H.

Hi, Robert. Unfortunately, they are several housings that can work with the B129 motor. In order to locate the correct one you need, I will need to know the model of your existing pump housing. 
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Socket Set

Housing was leaking.

Written on 8/16/2019 by Guest

Great fit worked no more leaking.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.7  out of 5 stars)
13 Rating
5 star:
 
(9)
4 star:
 
(4)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews