Part # 3250-A02L
Manufacturer Code LA02L
Dimensions 5.75" L x 5.75" W x 1.5" D
Alternate Part #'s A02L, AXA02L, LA02L, LET2012003, LLA02L, 35-104-1000, PENLA02L
INYO # 3250-A02L PENTAIR / LETRO #LA02L OLD ARNESON # A02L GENERAL DESCRIPTION: THIS IS THE IMPELLER USED ON THE ARNESON A-60 BOOSTER PUMP AND ON THE OLDER LETRO BOOSTER PUMP. MATERIAL: IMPELLER BODY: BLACK PLASTIC THE FEMALE TREADED PART THE GOES ON THE MOTOR IS BRASS THE ORIGINAL VERSIONS MAY BE SLIGHTLY DIFFERENT IN COLOR AND MATERIAL CLOSED FACE OR OPEN IMPELLER: CLOSED FACE NUMBER OF VANES: 5 THE VANE OPENINGS ARE VERY SMALL; ABOUT 3/4" LONG OUTSIDE DIAMETER: 5-7/8" (A) THICKNESS: 7/16" (OUTSIDE THICKNESS AT OUTSIDE EDGE) (B) THICKNESS: 3/16" (INSIDE THICKNESS AT OUTSIDE EDGE) FRONT TO BACK: 1-1/2" INLET INSIDE DIAMETER: 15/16" INLET OUTSIDE DIAMETER: 1-5/32" THE INLET OPENING EXTENDS ABOUT 3/8" BEYOND THE IMPELLER FACE SHAFT LENGTH: NO SHAFT BUT THE FEMALE THREADED PORTION IS SURROUND BY A BRASS REINFORCED ROUND SECTION WHICH IS 1-1/8" DIAMETER AND EXTENDS ABOUT 1/2" PAST THE IMPELLER FACE MARKINGS: THESE WILL VARY BY MAKE MAY HAVE "A02L", "LA02L" OR JUST "LETRO PRODUCTS" MOLDED ON
My Letro Booster Pump needs a new impeller and there are two listed as a replacement. How do I know which one is for my pump?
Reply
Determining the correct impeller for your LA01 Letro Booster Pump can be done by counting the bolts on your volute. The Volute is the pump housing. If your volute has a four bolt pattern then the LA02L is the correct impeller choice. The eight bolt pattern volute has the LA05L as the replacement impeller.
Reply
Does the LA02L impeller use a ceramic seal or just the spring part that sits in the seal plate?
Reply
The Most Recent Reviews
(5 out of 5 stars) Arneson impeller
Reviewed By: Dean F. ()
Pros: cost
Replacement part works great. Saved significant $$ by rebuilding my booster pump rather than buying a new one.
Was this review helpful to you?