Impeller Kit, 1.0 THP - SPX4007CKIT Discontinued

Part # 5112-024

By Hayward Pool Products

  5 Average  



Part # 5112-024

Manufacturer Code SPX4007CKIT

Alternate Part #'s SPX4007CKIT, 35-150-3231, HAY-101-1520

Product Description

Hayward NorthStar Impeller Kit, 1.0 THP - SPX4007CKIT.


?     Asked on 1/22/2020by Cindy Notley

Is the SPX4007CKIT Impeller rated for 3/4 HP and 1.0 HP Hayward Northstar Pumps? I got this kit and installed it on my 1.0 HP Northstar pump. I have not fired it up yet. Is it ok or should I be concerned?

A  Answered on 1/23/2020 by InyoPools Product Specialist Lennox H.

Hi, Cindy. This impeller kit can be used with a 3/4 HP Full Rate - SN1072 or 1.0 HP Up Rate - USN1102 or greater motor.

?     Asked on 7/28/2009by Guest

What is included in this impeller kit?

A  Answered on 7/28/2009 by InyoPools Product Specialist Patrick P.

This kits includes the following: Impeller, Impeller Ring, Seal Assembly (Shaft Seal).


Est. Repair Time

1 to 2 hrs

Tools Needed

Adjustable Wrench, block or other tool to set seal in holder

Leaking pool pump

Written on 7/5/2017 by Guest

INYO makes it easy for you to buy the right parts for your job. The support is great. Bought the whole kit , as opposed to just seal, because the pump in question was manufactured several years ago and INYO tells you specifically what you must buy for a successful project. Replacing this kit is straight forward, but it requires complete pump disassembly and reassembly. Only real issues are assembling the impeller to the motor shaft, which requires getting to the shaft by removing the motor run capacitor to hold the shaft in place to screw the impeller on and reassembling the motor assembly to the pump body, due to the tight fit caused by the seal between the motor assembly and the pump body. Otherwise, a piece of cake.

Were these instructions helpful? 


Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews