By Balboa
Part # 5190-037
Manufacturer Code 1212225
Dimensions 4" X 1.05"
Alternate Part #'s 1212225, PPUL30IMP, PPUL3IMP, 35-430-1019, VIC1212225
INYO # 5190-037 VICO/BALBOA # 1212225 OLD VICO # PPUL30IMP
************************************************
GENERAL DESCRIPTION: CLOSED FACE GRAY IMPELLER, 3 HP THE INLET OPENING IS NOT DOUBLE STEPPED THE SHAFT SIDE OF THE IMPELLER IS FLAT THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE THE THE INLET THIS HAS STRIPES ON THE SHAFT TO IDENTIFY THE IMPELLER
************************************************
MATERIAL: GRAY PLASTIC TYPE: CLOSED FACE NUMBER OF VANES: 5
************************************************
DIMENSIONS: OUTSIDE DIAMETER 4" (A) TOTAL LENGTH: 3-1/2" OUTSIDE THICKNESS AT EDGE: 1" (B) INSIDE THICKNESS AT EDGE: 13/16" SHAFT LENGTH: 1-7/8" SHAFT DIAMETER: 11/16" INLET OPENING OUTSIDE DIAMETER: 2-1/4" INLET OPENING LENGTH: 3/8"
************************************************
MARKINGS: STRIPES ON SHAFT STARTING FROM THE END THESE ARE RED BLACK SPECIAL NOTE: CURRENT IMPELLERS ARE BEING MADE WITH NO STRIPES ON THE SHAFT
| Impeller Type | Closed Face |
| Impeller Diameter OD | 4" |
| Vane Width ID | 13/16" |
| Eye Diameter OD | 2-3/16" |
| Eye Length | 5/16" |
| Impeller Thickness OD | 1-1/16" |
| Seal Seat Depth | 1/8" |
| Shaft Length | 1-7/8" |
| Shaft Diameter OD | 11/16" |
| Seal Seat Diameter OD | 1-1/2" |
| Manufacturer | Vico/Balboa |
| Pump Application | Ultima |
