Part # 5064-052
Manufacturer Code 42234506K
Dimensions 15" L x 14" W x 8.5" D
Alternate Part #'s 24-0138-07-R , 24013807 , JAC-101-4506, 42-2345-06-R, 42234506K, 42234506R, 42234506R000, 5064-051 , 5064-052 , 5064-800, 5067-07
This includes; LID, LOCK RING, O-RINGS, BASKET, PUMP POT, MOTOR SUPPORTS, DRAIN PLUG.
Jacuzzi Magnum/Magnum Plus/Magnum Force/Magnum Force 3 Pumps, for units manufactured prior to 2/03, this complete trap kit will be required
When I replace the Magnum Force housing, do I need any additional parts, ie O rings, pump seal, some type of a kit?
Thanks
Dan
Reply
Hi Daniel. The only additional items we could recommend might be the housing o-ring and some lubricant to help it seal and last a long time. You would not need to use anything in the tune-up kit unless you were also taking the motor and impeller assembly apart.
Reply
I have an older Jacuzzi Magnum Force pump, circa 1988-1990, and the body has a crack which leaks. Will this replacement body fit or can be adapted or is there another part number I should be looking for? The picture sure looks similar to mine
Reply
Hi Daniel, this Magnum Force Housing Ass'y (42234506r00) - 42234506K will be just what you need.
Reply
My pump has a label saying Magnum 1000 ... I'm assuming it dates back to pre 2003. I need to replace the housing because there is a leak at the bottom of the basket area (not the basket itself). I just bought a new basket. Is this the part to replace it?
Hello allison, Yes the Jacuzzi Inc. Magnum Force Housing Ass'y After 2/03 (42234506r00) part 5064-052 will be the correct replacement
Reply
My pump has a leak. I've replaced seals, still leaks. I can't see the leak, it's somewhere on the bottom. So, I'm thinking the only thing left is the housing itself. Have you seen housings that spring a small leak?
I don't know how to identify my pump by part number. It doesn't say MagnumForce on the side, because it says it is Jacuzzi brand. Is the identifying difference between pre-2/02/03 and post-2/02/03 threads being male on the housing? If yes, then this housing would work?
Hi, Kenneth. This Magnum Force Housing - 42234506K will replace the one you have. However, the issue may be caused by the Pump Shaft Seal - PS-3868 and or a bad Seal Housing.
Reply
I have replaced the seal assembly. But, if the seal was leaking where would I expect the water to exit the pump?
Reply
Kenneth, Water will leak from the between the Motor and the Seal Housing.
Reply
Does this assembly include the impeller housing and seal?
Thanks
Reply
I have a pre 03 magnum force. Label says 1UMF-S
94027110. It’s 1.5 hp.
Will this replace the housing?
What is the difference between the 5064-052 and 5064-05A?
Hello, Part number 5064-05A is for the standard magnum force. Part number 5064-052 is the housing to retrofit magnum plus. You will need part number 5064-05A.
Reply
Will my existing motor (UST 1102) fit this housing?
Reply
That motor will fit up the the Jacuzzi Magnum Force Housing. Here is a parts diagram of the entire assembly showing that UST1102 is one of many motors that will fit.
Reply
Is the basket included--This will be an upgrade from the old model with a 9 inch basket.
Reply
The basket is included in part number 5064-052 ( Jacuzzi Magnum Force Housing Ass'y After 2/03 ) This includes : LID, LOCK RING, O-RINGS, BASKET, PUMP POT, MOTOR SUPPORTS, DRAIN PLUG.
Reply
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great option over total replacement
Was this review helpful to you?
(5 out of 5 stars) Jacuzzi Magnum Force Housing Assembly
Reviewed By: Rob T. ()
Pros: Delivered on time, fit perfectly.
Cons: Needs instructions
Was this review helpful to you?