Is the basket included--This will be an upgrade from the old model with a 9 inch basket.
Reply
The basket is included in part number 5064-052 ( Jacuzzi Magnum Force Housing Ass'y After 2/03 ) This includes : LID, LOCK RING, O-RINGS, BASKET, PUMP POT, MOTOR SUPPORTS, DRAIN PLUG.
Reply
Will my existing motor (UST 1102) fit this housing?
Reply
That motor will fit up the the Jacuzzi Magnum Force Housing. Here is a parts diagram of the entire assembly showing that UST1102 is one of many motors that will fit.
Reply
I have a pre 03 magnum force. Label says 1UMF-S
94027110. It’s 1.5 hp.
Will this replace the housing?
What is the difference between the 5064-052 and 5064-05A?
Hello, Part number 5064-05A is for the standard magnum force. Part number 5064-052 is the housing to retrofit magnum plus. You will need part number 5064-05A.
Reply
Does this assembly include the impeller housing and seal?
Thanks
Reply
My pump has a leak. I've replaced seals, still leaks. I can't see the leak, it's somewhere on the bottom. So, I'm thinking the only thing left is the housing itself. Have you seen housings that spring a small leak?
I don't know how to identify my pump by part number. It doesn't say MagnumForce on the side, because it says it is Jacuzzi brand. Is the identifying difference between pre-2/02/03 and post-2/02/03 threads being male on the housing? If yes, then this housing would work?
-CLEARANCE!!-42234506K.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-CLEARANCE!!-42234506K.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Jacuzzi Inc. Magnum Force Housing Ass'y Before 2/03 (42234506r00) - 42234506K")
Hi, Kenneth. This Magnum Force Housing - 42234506K will replace the one you have. However, the issue may be caused by the Pump Shaft Seal - PS-3868 and or a bad Seal Housing.
Reply
I have replaced the seal assembly. But, if the seal was leaking where would I expect the water to exit the pump?
Reply
Kenneth, Water will leak from the between the Motor and the Seal Housing.
Reply
My pump has a label saying Magnum 1000 ... I'm assuming it dates back to pre 2003. I need to replace the housing because there is a leak at the bottom of the basket area (not the basket itself). I just bought a new basket. Is this the part to replace it?
-42234506K.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-42234506K.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Jacuzzi Inc. Magnum Force Housing Ass'y Before 2/03 (42234506r00) - 42234506K")
Hello allison, Yes the Jacuzzi Inc. Magnum Force Housing Ass'y After 2/03 (42234506r00) part 5064-052 will be the correct replacement
Reply
I have an older Jacuzzi Magnum Force pump, circa 1988-1990, and the body has a crack which leaks. Will this replacement body fit or can be adapted or is there another part number I should be looking for? The picture sure looks similar to mine
Reply
Hi Daniel, this Magnum Force Housing Ass'y (42234506r00) - 42234506K will be just what you need.
Reply
When I replace the Magnum Force housing, do I need any additional parts, ie O rings, pump seal, some type of a kit?
Thanks
Dan
Reply
Hi Daniel. The only additional items we could recommend might be the housing o-ring and some lubricant to help it seal and last a long time. You would not need to use anything in the tune-up kit unless you were also taking the motor and impeller assembly apart.
Reply
-42234506K.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-42234506K-25a21938-82f3-46c3-8436-4a80cfaa5903.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-42234506K.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Jacuzzi Inc. Magnum Force Housing Ass'y Before 2/03 (42234506r00) - 42234506K")
-42234506K-25a21938-82f3-46c3-8436-4a80cfaa5903.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Jacuzzi Inc. Magnum Force Housing Ass'y Before 2/03 (42234506r00) - 42234506K")