Hayward 2 HP Up Rate Dual Speed NorthStar Replacement Motor - SPX1615Z2MNS

Part # 5112-064

By Hayward Pool Products

  5 Average  

Details

Top

Part # 5112-064

Warranty 1 Year

Manufacturer Code SPX1615Z2MNS

Dimensions 12.5" L x 9.5" W x 6.5" D

Alternate Part #'s 7-186512-01, 718651201, SP1620Z2BC, SPX1615Z2MNS, HAYSPX1615Z2MNS

Product Description

NORTHSTAR 2-SPEED, 2 HP, 230 VOLT, UPRATED MOTOR 11.5 AMPS HIGH SPEED 4.0 AMPS LOW SPEED SERVICE FACTOR 1.25

 **NOTE THIS MOTOR IS SHIPPED LESS HI-LO SWITCH. YOU MAY PURCHASE THE HI-LO SWITCH SEPARATELY BY ORDERING PART # 17590450.**

Product Specifications

Notes:
California Title 20 Compliant
Top

?     Asked on 5/6/2021by BENNY MARTINEZ

I HAVE A SINGLE SPEED CENTURY MOTOR CAT. # 130/ SERIAL # 19718CH TYPE CX FRAME X56J, 2 HP, 230 VOLTS, 3450 RPM ON A HAYWARD PUMP ASSEMBLY. I WOULD LIKE TO REPLACE IT WITH 2 SPEED MOTOR. WOULD THE HAYWARD 2 HP UP RATE DUAL SPEED NORTHSTAR REPLACEMENT MOTOR (SPX1615Z2MNS) PART NO. 5112-064 WOULD BE THE RIGHT CHOICE? NOTE: THE NAME PLATE ON THE PUMP HOUSING IS FADE OUT AND CAN NOT BE READ. MY OWNER PAMPHELT SHOWS IS4007-00B, WONDER IS THIS IS PUMP MFG. SERIES? PLEASE CONFIRM THE ACCURATCY THANKS.
 Reply

A  Answered on 5/6/2021 by InyoPools Product Specialist Craig C.

Hello Benny.  The Hayward motor model SPX1615Z2MNS is the correct replacement for the Century motor CAT. #130 when changing from a single-speed motor to a two-speed motor.  The part number you provided, IS4007-00B, indicates that this is a Hayward Northstar pump.
 Reply


?     Asked on 5/10/2019by Bill Juring

What is the bolt pattern dimensions?
 Reply

A  Answered on 5/10/2019 by Industry Professional

Hi, Bill. The bolts holes are 4-1/4" center to center.
 Reply


?     Asked on 5/6/2019by Bob Rudow

Can you tell me the part number for the bearings in this motor? Maybe the dimensions? Hayward is pretty much no help on this as they want to send me to a local "pool professional".
 Reply

A  Answered on 5/6/2019 by InyoPools Product Specialist Patrick P.

Hi Bob, we are showing there are two bearings in this motor, one being the 6203 Bearing and the other being the 6304 Bearing. We put together a few videos on how to replace bearings which you may find helpful when you tackle this project. Part 1 Video on How to Replace Pool Motor Bearings and Part 2 Video on How to Replace Pool Motor Bearings
 Reply

  • Commented on 5/6/2019 by Product Owner

    Thanks for the info!
     Reply

    • Commented on 5/6/2019 by InyoPools Product Specialist Patrick P.

      You're welcome Bob! If you need any help let us know.
       Reply


?     Asked on 4/30/2019by Bob

So I've replaced the shaft seal and that's all perfect now, except the motor has gotten louder, so I'm thinking that the bearing on that side got destroyed from the leak. Where can I find a new set of bearings for this motor?
 Reply

A  Answered on 5/6/2019 by InyoPools Product Specialist Michelle B.

Hello, Unfortunately, we do not carry bearing replacements for dual speed motors. We recommend contacting the manufacturer on finding the correct ones for your motor. You can contact them at 1-800-429-9273.
 Reply


?     Asked on 4/22/2019by Bob

I've installed this, but looks like I have a lead at the impeller seal, as the old impeller has a ring worn into it where the shaft seal is supposed to seat. Can you tell me which replacement impeller I should get?
 Reply

A  Answered on 4/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Bob. You will need the Impeller Kit - SPX4020CKIT
 Reply


?     Asked on 11/26/2018by Mike Diehl

Will this motor replace the SPX1615X1MNS I currently have in my Hayward Northstar? The picture I attached is a replacement single speed that is currently installed. Also, if this motor will work is there a manual switch for the speed?

 Reply

A  Answered on 11/26/2018 by InyoPools Product Specialist Lennox H.

Hi, Mike. This Dual Speed Motor can be used as a replacement for SPX1615X1MNS. You will also need the Bracket With Black Toggle Switch - 17590450to operate the motor. 
 Reply


?     Asked on 8/24/2016by Cody

Are you able to list the replacement bearings needed for this motor? Thank you.
 Reply

A  Answered on 9/2/2016 by InyoPools Product Specialist Lennox H.

Hi Cody, The parts list we have does not list the bearing size for this motor, you will have to contact Century at 866-887-5216.
 Reply


?     Asked on 7/2/2016by Michael D Abram

Hi i got this replacement motor from you guys and the wiring is different mines stated number 1 red wire number 2 purple wire and 3 or 4 black wire the motor you sent me has 1 red wire 2 white wire and 3 or 4 black wire do this wire up the same i dont have a owners man guide for this motor model number SP1620-Z-2-BC
 Reply

A  Answered on 7/5/2016 by InyoPools Product Specialist Lennox H.

Hi Michael, The "Red" and "Black" wires are you hot, the "White" is your low speed and the "Green" is the ground.
 Reply


?     Asked on 5/20/2016by Jerry Kaufer

My pump is the northstar and actual motor number is SP 1620-Z-2-BC. Is this the correct replacement motor even though it indicates 1615Z2MNS? What is the difference?
 Reply

A  Answered on 5/23/2016 by InyoPools Product Specialist Lennox H.

Hi Jerry, This is the correct replacement for the SP1620-Z-2-BC.
 Reply


?     Asked on 8/1/2015by Joe M

Is this a drop-in replacement for a 56J, SF 1.20 2HP single speed motor?
 Reply

A  Answered on 8/5/2015 by InyoPools Product Specialist Lennox H.

Hi Joe, The 2 Hp 2 Speed Up Rated Motor (5112-064) has a 56Y Frame motor and is a 2 speed motor. The 2 HP 56J Full Rate Threaded Round Flange Motor (B130) would be a drop-in replacement.
 Reply


?     Asked on 1/11/2012by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews