Part # 5231A
Warranty 1 Year
Manufacturer Code USQ1072
Dimensions 12.5" L x 6.5" W x 6.5" D
Voltage 115/230, Max Amps 115V = 11.8 230V = 5.9, Single Speed, Square Flange, RPM = 3450, Threaded Shaft, Frame = 48Y Used on the following models: Sta-Rite Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas, Dyna-Max Pentair Whisperflow, Pinnacle and Anthony AR2 Series.MPRA6D-146L
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Option:
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Can this pump be used to replace the one attached in the photo? If not why not?
Thanks so much
Scott
Hello Scott, the correct replacement motor for your motor model c48d62a04 is the SQ1072. We also recommend purchasing the shaft seal when replacing the motor which is a HAYWARD SHAFT SEAL (OEM) - SPX2700SA under the assumption that you do have the Hayward booster pump model 6060.
Reply
Is this the correct motor to replace?
Hello Pat, the correct motor for your UST1072 is actually our UST1072. We also recommend replacing the seals and gaskets when replacing a pool pump motor. Here is our "Finding the Tune-Up Kit for Your Pool Pump" guide that we put together that should assist you with that process.
Reply
Is this the right replacement for:
Hello, yes, the Century (A.O. Smith) .75 HP Up Rate Motor, Square Flange 48Y Frame, Single Speed - Model USQ1072 would be the correct replacement for your motor.
Reply
