Part # 5110-22
Manufacturer Code SP1600TAP
Alternate Part #'s SP1600TAP, SPX1600TAP, 35-150-1002
Housing Installation Kit
When would I need to use Hayward part number SP1600TAP?
Reply
You would need to replace Hayward part number SP1600TAP if the old threads have stripped or are petruded out and not creating the seal after replacing the housing gasket.
Reply
The brass nut that sets in the Super II housing came out with the screw will repair kit solve that problem? There are two brass nuts that will not allow me to fully tighten down the pump motor.
Reply
yes, the Repair Tap Set, F/pump Housing Wg (sp1600tap) will allow you to reinsert the brass fittings into the housing. If this does not work, you would need to replace the Pump Housing Strainer #5110-071 or 5110-072 depending on your pipe sizing.
Reply
Do instructions come with the Repair Tap Set, F/pump Housing Wg (sp1600tap)? Is this a set of six taps?
Reply
Hello Loyde- Unfortunately this tap set does not come with instructions, and this is only 2 of the inserts needed.
Reply
Does the tap set come with 2 of everything or 4 of everything (bolts and taps)?
Reply
This is as pictured. Just one bolt, one nut and two taps.
Reply
Why would you need two taps with one bolt? I thought each bolt uses one tap.
Reply
It only requires one tap but they mfgr provides two
Reply
I don’t understand why 2 taps are needed for 1 bolt?
Reply
This set is one complete bolt kit. If you need to repair 2 bolts you will need to order 2 sets
Reply
