Part # 5111-27A
Manufacturer Code SP1500UNPAK2C
Alternate Part #'s SP-1500UNPAK2C, SP1500UNPAK2C, 89-150-1106, HAY-101-1391, HAYSP1500UNPAK2C
HAYWARD UNION, SET OF 2 - NOT SOLD AS SINGLES INCLUDES: (2) UNION NUTS . (2) O-RINGS . (2) CONNECTORS, 1-1/2"SLIP X 2"SPG CONNECTORS ARE NOT AVAILABLE SEPERATELY
my CL 200 seems to use a 1.5 threaded (on the feeder) and slip into a 1.5 pvc .. I would like to use its 1.5 threaded to a slip to a larger 2' pvc.
Hello Michelle. The addition of a 2" slip coupler onto the outside of the 1.5" side (the side opposite the 1.5" threads) will transition that fitting to a 2" pipe size.
d pump powerflo matrix pumup and i need the unions for the sp1500unpak2 do you have them in stock and can i get the over night ?
We have a nut that is cracked. This pack looks IDENTICAL to what we need. The pump is an OLD model- SP 1711UN. Photo's attached. . The pipe is 1 1/2" so we know 2 parts in this kit fit but the nut, which we got from manufacturer as their part # spx1500g isn't 2". Do you think this kit will be a good match?
Hi Ashley, yes this union kit will be compatible with your Hayward PowerFlo II model pool pump.
I am trying to connect the CL200 to my intex pool that uses 1 1/2 inch flexible pipe. What adapters are needed? thanks.
Are the unions made of PVC? I noticed they are black and was curious if they were constructed of ABS?
Can I glue the 1 1/2" schedule 40 pvc into the fitting with blue pvc glue?
Hi Pat, The sp1500unpak2c is made out of ABS. If you are gluing pvc to abs then the preferred glue is ABS to PVC transitional cement. If you do a search on Google for "ABS to PVC transitional cement" you will find a product by Weldon as well as Oatey. You should be able to find these at your local hardware store. I personally have always used pvc glue when gluing pvc to abs and have not had issues but ideally you would use the ABS to PVC transitional cement.
I just bought a Hayward cl200 inline feeder from you to replace my old one . which connectors do I need . I have 2 inch pipe going in and out of old feeder.
Hi Tino, These Union Connector (SP1500UNPAK2C) are the correct unions for the CL200 chlorinator using 2" plumbing.
(5 out of 5 stars) 1 1/2" Union Connectors
Reviewed By: Jeff H. from Robinson, IL ()
Pros: As described and worked as I needed them to.
The union connectors that came with my chlorine feeder had male threads on one side. I could have used these as the unions had 1 1/2" slip connections built into them but then the threads that were not used would show all of the time. Personally I just didn't like the look.
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
Does what it is supposed to do. I did find these connectors to be trickier than most to get the PVC seated all the way. Keep that in mind when measuring and fitting. But other than that, worked great. A must have if you need to re-plumb something around your chlorinator.