Valve Assy.,multiport 1 1/2"de Eqfv Wg (50181212) Discontinued

Part # 4650C

By Pentair Pool Products


Details

Top

Part # 4650C

Manufacturer Code 50181212

Alternate Part #'s 50181212, 26-102-1532, PEN50181212

Product Description

Valve Assy.,multiport 1 1/2"de Eqfv Wg (50181212)

Please note:  the valve shipped might be white, not black as pictured.

The has been discontinued by the manufacturer and the suggested replacement is the SM-10-AOS Valve which may require a little re-plumbing

Top

?     Asked on 6/4/2020by daryl

does this fit my American Titan Vertical Grid Filter Model# 582090?
 Reply

A  Answered on 12/2/2020 by InyoPools Product Specialist Hector F.

Hi Daryl, yes this is compatible with the American Products Vertical Grid D.E. filter model 582090 however has been replaced by the multiport valve model SM-10-AOS
 Reply


?     Asked on 8/26/2017by JB

I've got a vertical American Stainless Steel DE Filter with 1 1/2" Unions. The multiport is leaking from some hairline cracks in the base - looks hopeless. It's label says American Multiport 987003. I've seen that some say the direct replacement was the 50150111 (slip) or 50160111 (threaded) but that's it is obsolete. What's my best option for the easiest replacement?
 Reply

A  Answered on 8/27/2017 by InyoPools Product Specialist Lennox H.

Hi, JB. This MPV Assembly - 50181212 is your best option with the pre-plumbed ports.
 Reply


?     Asked on 7/15/2012by Guest

I want to replace my Multiport valve, it is an American Multiport Valve attached to an American Titan Vertical Grid Filter model #582090. What valve should I order, also I want to replace the unions and o-rings hooking up to the filter.
 Reply

A  Answered on 7/15/2012 by InyoPools Product Specialist Patrick P.

If the plumbing going into your American Titan Vertical Grid Filter is 1.5" then you would require this valve here http://www.inyopools.com/Products/07501352028073.htm and if the plumbing is 2" then you would require this multiport valve here http://www.inyopools.com/Products/07501352028074.htm you may view the parts schematic here for the unions on your filter http://www.inyopools.com/pool_parts_titan_stainless_steel_d_e_.aspx
 Reply


?     Asked on 1/31/2012by Guest

I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
 Reply

A  Answered on 1/31/2012 by InyoPools Product Specialist Patrick P.

In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
 Reply