Part # 6230-09
Part # 6230-09
Manufacturer Code 003898F
Dimensions 3-7/8" x 3-3/4"
Alternate Part #'s 003898F, 47-197-1210, RAY1513568
THIS # IS MARKED ON THE LABEL ROBERT SHAW GAS VALVE # 7000 BMVR-S7C USED ON RAYPAK MILLIVOLT NATURAL GAS MODELS 53, 53A, 53B, 055A, 151, 153, 153A, GEMINI 181-401, VERSA 183-403, 183A-403A, 183B-405B, RP2100 185-405, P-R185A-405A, C-R185A-405A. ..... INCLUDES GAS VALVE ALUMINUM TUBING WITH BRASS FITTINGS 1/8"x 34" LONG 1/2"x3/4" BUSHINGS (2) VALVE SUPPORT BRACKETS (2) SCREW, HEX HEAD #10x3/8 (2) INSTALLATION INSTRUCTIONS
I am looking for a 1/2 inch inline milivolt gas valve for my 10 year old Raypak versa 055a heater. The pilot light stays lit but sometimes I have to rap on the gas valve to get the main burner to fire. sometimes it will light for 4 or 5 days ok but the last 4or 5 times I have to whack the gas valve and then it heats up fine. Help
Will this fit a Raypak model #151 WHG? This one looks a little bit different than the one installed on my unit.
Hi John, if you had the Milivolt version then yes this would be the correct gas valve. If you have the electronic ignition (IID) version then you would require this Raypak IID Natural Gas Valve Normally the electronic ignition models have a digital readout where the Milivolt models just have manual knobs for control.
Thank you very much. I have the manual knobs no digital readout. My system was installed years ago before I owned it. I asked the question because the tubing import looks to be on a different side than mine, I guess it does not matter to much where it enters, all else looks right.
Is this the correct valve for a Raypak RP2100 Model P-R335A-EN
Serial Number: 0002017312
I added some photos of my existing valve for your reference.
Can you confirm this is a replacement part for model BR335EN, serial 9803010218 please? I notice there seems to be slightly less wiring.
Is there a image or diagram on which wires go to the certain prongs on this product the PP. PPTH and TH. I’m not sure my is properly installed but also not sure how to fix it....
There are several different instructions that come with the gas valve. The reason there are several is because the OEM mfg can use several different mfg's of the valve using the same original OEM part #. We do not know if you have a Honeywell, a Robert Shaw or other brand and we also do not know if you have a standard or solid state thermostat on your heater. See snipimage that should help.
Pilot is lit, when you turn the unit on, it sounds like the unit is going to light because it clicks but the unit doesn't light and the pilot light goes out. The gas valve is in the on position. Could it be the gas valve needs replacing?
Hi, Frederick. The Gas Valve or the Pilot Generator could be the issue. Reference your owner's manual troubleshooting guide for more info.
is this compatible with raypak model p-p185b-mn
Is the the "combination gas valve" for a Raypak Pool Heater, Model B-M055B-MN, and serial number 0609176928?? I need to make sure I get the right part. I called Raypak, and they stated the part # is 003898-F.
Thanks for confirming, either way, before we order.
Yes, that is the correct gas valve for your heater.
Can this valve be used to replace the obsolete one on my comfortzone PSGII -180-N , Model 110-355 natual gas heater ?
It appears to be the same Rober Shaw valve , Pls advise if any other valve show be ordered to replace current one. Thx