Part # 4600-4712
By Pentair Pool Products
Part # 4600-4712
Manufacturer Code 154712
Dimensions 2.5" L x 2.5" W x 2" D
Alternate Part #'s 154712, 154712Z, 31-110-1199, PEN154712
DRAIN CAP (154712)
So this piece is half of what I need. My drain plug has this but then a male end with O ring. Cant find that part anywhere even though both my part and this one have the same 154712 stamped on top
I have a Pentair Quad DE 60 filter dated 2010 and the plug cap (p/n 154712) broke off and became separated from the plug itself. The plug has a slotted groove to remove/install and the seal is holding however it is difficult to access the groove. Is this component composed of three pieces (plug, o-ring, and cap), and if what are the part numbers?
Hi, Frank. This is just a cap which has female threads.
I have the same question as above. We have the Pentair FNS Plus 60 manufacture date of 09/16/2009. The cap seemingly broke off while I was trying to get it off. The part that broke off is 154712. As the person above mentioned, it appears the plug piece that has a screwdriver slot is still in place w/ the o-ring and is not leaking. Thought this was all 1 piece when I removed it prior, so I'm a bit confused what I need to replace at this point. Please advise what all makes up this drain
does this drain cap come with a gasket and will it fit a Pentair ccrp150?
Hello would this drain plug work with the SD-40 Pentair?
Does this cap include the rubber gasket inside ? If not, what is the gasket part number ? Actually my cap is OK but the gasket is torn causing my drain to have a slight leak.
Will this work with an SD-80?
Less than 1 hr
I simply unscrewed the old drain cap, cleaned my pool filter while I was at it, used the new drain cap, gasket included, and no leaking ! Thank-you INYOPools!