Drain Cap w/ Gasket and Screen - SX180LA

$11.21

IN STOCK

Part # 4802-16

By Hayward Pool Products

  4.5 Average  

Details

Top

Part # 4802-16

Manufacturer Code SX180LA

Alternate Part #'s SPX180LA, SX180LA, 31-150-1379, HAY-051-2173, HAYSX180LA

Product Description

Drain Cap w/ Gasket and Screen - SX180LA

**Note: Hayward ProSeries Sand Filter Models Manufactured After 2006.**

Top

?     Asked on 3/31/2022by Ron Wayden

How does the gasket install? From inside the filter tank and when the sand is removed? I left the cap off one winter season and taped over the drain hole and apparently an animal chewed on the drain threads such that I now get a leak between the cap and the drain screen threads. This may be what I need to stop the leak.
 Reply

A  Answered on 3/31/2022 by InyoPools Product Specialist Rich N.

Hi Ron, the gasket is flat and installs on the inside of the cap.  It seals on the outer surface of the drain, so chewed threads may not be an issue, but it may not seal if the flat sealing surface on the filter drain was chewed up.  
 Reply


?     Asked on 12/29/2021by Raul Gonzalez

Hello, Will this drain cap fit an S270T Pro Series Sand Filter? If so, I've heard of too many reviews stating that the new cap leaked. In fact, I bought the entire set up and I don't think the original cap ever fit right; I think I may have overtightened and so t cracked. Should I have used plumbers tape? Seems other owners are recommending..
 Reply

A  Answered on 12/30/2021 by InyoPools Product Specialist Rich N.

Hi Raul, these can be tricky to get on if the sand is not completely cleaned off of the sealing and threaded surfaces.  This is the correct drain plug for filters made after 2006; older (pre-2006) filters used this Cap & Gasket Kit - SX180HG.
 Reply


?     Asked on 5/21/2020by Inyo Visitor

I have a S244T2. Will this drain plug fit?
 Reply

A  Answered on 5/22/2020 by InyoPools Product Specialist Hector F.

Yes, this drain cap will work for the Hayward S244T model sand filter manufactured after 2005, and the part number 4802-09B that you can view by clicking here would be the drain cap for models manufactured before 2005. 
 Reply


?     Asked on 5/17/2020by tififny

will this fit model s180t93s
 Reply

A  Answered on 5/20/2020 by InyoPools Product Specialist Hector F.

For models manufactured after 2005 yes, and for models manufactured before 2005 then it would be part number 4802-09B that you can view by clicking here
 Reply


?     Asked on 4/12/2020by Inyo Visitor

This looks like the cap we need. its for Model S180T92S. Serial 21121107000759010.The outlet appears to be about 1 3/4" on the outside of the threads. Please confirm. Thank you Connie
 Reply

A  Answered on 11/19/2020 by InyoPools Product Specialist Megan C.

The S180T92S and S180 filters have two different caps per year of manufacturing of the units. There is the Drain Cap w/ Gasket and Screen - SX180LA for 2005 and after. The Cap & Gasket Kit - SX180HG is for years 2005 and prior. 
 Reply


?     Asked on 10/23/2019by John Housefield

will this fit a sw256t
 Reply

A  Answered on 10/23/2019 by InyoPools Product Specialist Lennox H.

Hi, John. It will NOT. You will need the Cap & Gasket Kit - SX180HG
 Reply


?     Asked on 5/14/2018by Bruce

Will this fit my S190TSCP filter
 Reply

A  Answered on 5/14/2018 by InyoPools Product Specialist Charlie R.

Bruce, No, the correct drain cap for your S190TSCP filter is part # sx180hg.
 Reply


?     Asked on 6/18/2017by Brendan

Will this cap fit my Hayward Pro Series Sand Filter Model # S 166T? It is 1.5 inches at the outlet end.
 Reply

A  Answered on 6/18/2017 by InyoPools Product Specialist Lennox H.

Hi, Brendan. This Drain Cap Assy will fit the S166T unit if it was manufactured after 2006.
 Reply


?     Asked on 5/26/2017by Inyo Visitor

will this fit a pro series 210s filter?
 Reply

A  Answered on 5/27/2017 by InyoPools Product Specialist Hector F.

This drain assembly works for the S210S models manufactured after 2005.
 Reply


?     Asked on 10/7/2016by marc shipman

i have this Hayward filter system. it is inside a building and i want to extend a drain pipe to the outside of the building. i know that i need to have a shutoff valve inline, but do they have a drain kit of some sort to do this, or do i make it myself.
 Reply

A  Answered on 10/11/2016 by InyoPools Product Specialist Alan M.

Unfortunately, there is no drain kit for this filter. Yo would need to build it yourself.
 Reply


Top

Review Summary

 (Average 4.5  out of 5 stars)
2 Rating
5 star:
 
(1)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)