Details

Top

Part # 5020-142

Manufacturer Code R0445304

Alternate Part #'s A0580905 (MOLD# ON IMPELLER), R0445304, 35-295-1146, JDYR0445304

Product Description

IMPELLER, 1-1/2 HP FULL, 2 HP UPRATE

**NOTE: Replace with P/N R0807201 - Impeller Kit and R0445400 - Diffuser.**

Top

?     Asked on 9/27/2013by Guest

Is the shaft seal included with Jandy part number R0445304 (5020-142)?
 Reply

A  Answered on 9/27/2013 by InyoPools Product Specialist Patrick P.

No, the shaft seal is not included.
 Reply


?     Asked on 10/10/2014by Guest

From the picture on line it looks as if the impeller and diffuser are a kit with the o-rings. Am I correct on my assumption?
 Reply

A  Answered on 10/10/2014 by InyoPools Product Specialist Patrick P.

The 5020-142 is the impeller only. The diffuser and seals would need to be ordered separately.
 Reply


?     Asked on 8/20/2015by Steve Jorgensen

I have Jandy 1.0 HP pump and 1.5 HP on my pool and spa. The 1.0 HP pump has a screaming bearing and is down in pressure and can't purge its air. I pulled the 1.0 HP pump and slid over the 1.5 Pump into its place. I want to upgrade the 1.0 HP to 1.5 HP by replacing the motor and changing the impeller. The motor is easy but can I just buy 1.5 impeller?
 Reply

A  Answered on 8/24/2015 by InyoPools Product Specialist Lennox H.

Hi Steve, The Impeller will  include all the items pictured, it is not sold separately. You would also need to confirm if you have a 1.5 Full or Up-Rated motor, the impellers will be sized differently.
 Reply


?     Asked on 7/6/2016by Bill

I want to buy Part number 5020-142 and wanted to verify what is included in the kit before placing my order. The picture online for this part number shows multiple items. Can you also verify this is the correct kit for the Jandy Stealth shpf1.5-2.
 Reply

A  Answered on 7/10/2016 by InyoPools Product Specialist Lennox H.

Hi Bill, This Impeller Kit (R0445304) is the correct kit for the Jandy SHPF15-2 pump. It includes the impeller, shaft seal, diffuser and the diffuser o-rings.
 Reply


?     Asked on 10/5/2016by Brian

Is this the impeller for a Jandy PlusHP 1.5 HP pump? I'm replacing the motor with a B2854 and figured I might as well do the impeller too. And are the diffuser and o-rings separate?
 Reply

A  Answered on 10/5/2016 by InyoPools Product Specialist Scott W.

If you have the B2854 motor then the correct impeller is part number 5020-141 and yes the diffuser and o-rings are separate, part number 5020-106.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Wrench Set

Loud squeal followed by motor cycling off due to overheat. Probably a bearing issue.

Written on 6/8/2020 by Guest

Easy removal of bolts and flange that matched up perfectly to Vgreen 270 variable speed pump. Follow the directions and watch the online videos

Were these instructions helpful?