$489.99

Qty:

By Hayward Pool Products


Details

Top

Part # 5112-271

Warranty 1 Year

Manufacturer Code SPX3210Z2MER

Alternate Part #'s 7-k56aa23a04-05, sp3210z2me, sp3210z2mer, SPX3210Z2MER, 35-150-3110, HAYSPX3210Z2MER, HPPSPX3210Z2MER

Product Description

Motor, 1.5 HP Maxrate Dual Speed Tristar 208/230v (SPX3210Z2MER, SP3210Z2MER)

NOTE THIS MOTOR IS SHIPPED LESS HI-LO SWITCH. YOU MAY PURCHASE THE HI-LO SWITCH SEPARATELY BY ORDERING PART # 2512558-001.

Top

?     Asked on 1/11/2012by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


?     Asked on 6/17/2017by Jerry

I have this exact pump, and I want to know what other items I will need in order to hook everything together into the part where the water is seen through the strainer basket. I want to replace all of it at one time and need to know what other items I need in order to get my pool running again. Thank you.
 Reply

A  Answered on 6/17/2017 by InyoPools Product Specialist Hector F.

For the Hayward Tristar Pool Pump, I would recommend at least replacing keys number 8, 13, and 14 on the parts diagram here. It is also wise to inspect the impeller and diffuser before or during the job.
 Reply


?     Asked on 5/4/2020by Bud

When opening my pool from winter the slide pump won't work, if I switch on the pump there is nothing, no humming or other noise. I saw a email thread saying the impeller could be stuck or the capacitor could be bad. I inspected both: the impeller turns freely, the capacitor tests correctly and the motor is getting electricity. Is there anything else to check to save this pump/motor? If I cannot is this the correct motor for a SP3215X20 pump? What special tools do I need to swap the motor?
 Reply

A  Answered on 5/4/2020 by InyoPools Product Specialist Patrick P.

Hi Bud, You may want to take a multimeter to make sure you are getting power to the pump. If you are then yes this is a dead motor. The proper replacement motor for your pump will be this SPX3210Z1MR 1.5 HP Max Rate Single Speed TriStar Replacement Motor. You will also need this TriStar Seal Kit outside of these items then no special tools are needed.
 Reply

  • Commented on 5/4/2020 by Product Owner

    Thank you. I testing it and it is getting power. I noticed the original motor is 2hp versus the one your recommend is 1.5hp. I just want to confirm that is okay? Also I have the lube for the rings. Should all the seals still be replaced? Thanks
     Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers

Pool circulation pump locked up after 8 years.

Written on 10/30/2023 by Guest

Piece of cake easy replacement

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4  out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)