Model # 99996148-XP
Warranty 24 Months
Alternate Part #'s 99996148XP, MAY99996148-XP
Discover an Exceptional Experience
All swim, no work. That's the life for you. Forget about scrubbing the pool floors and scooping out leaves. The Dolphin E20 robotic cleaner does it all for you, automatically. The Dolphin E20 leaves your pool clean and the pool water sparkling clean!
Crystal-Clear Cleaning Results
Peace of Mind
Frequently Purchased with Dolphin E20 Cleaner
Which model has wifi capability to control the cleaner from a cell phone?
Hello Paul. The My Dolphin Plus mobile app is available on the M Series, models 400 and above, the S Series models 300 and above, and the E Series 40i and above. In conjunction with the new cloud-connected power supply, the My Dolphin Plus mobile app provides select models of Dolphin robotic pool cleaners with 24/7 connectivity that enables advanced remote control through Wi-Fi or cellular network.
hello my question is can this cleaner be used in a above ground pool
This particular cleaner is made for Inground Pools. Maytronics does make an above ground version though. Here is the link...Maytronics Dolphin E10 Above Ground Robotic Pool Cleaner - 99996133-USF
what's the difference between this model and the nautilus cc?
The only difference is the coloring. Besides that, it is the same cleaner. They have the same motor, filter, brush, and all other components.
How heavy is it and how heavy is it when you pull it out of the pool
It ways 15lbs. I have one of these and it does fill up with water that spills out as you pull it out of the water. So I would say maybe another 10 lbs that drains out back down to 15lbs.
How big/deep In-Ground pool is supported by this model? My pool is about 8' deep on the deep end and about 36 feet long 16' wide, (rectangular) See picture. Is this an appropriate model for my pool?
(5 out of 5 stars) I wish I would have purchased one of these years ago!
Reviewed By: ()
I was using a pressure cleaner and what a world of difference this makes. It certainly does the job faster, easier, and with less mess. I didn't want to spend a fortune and we have a small pool, so using a pressure cleaner seemed the route to go; I was so wrong. First of all, I was tired of it only doing certain areas of the pool and getting wet every time I tried to untangle the unit without shutting off the motor, first. The Maytronics Dolphin E20 climbs the walls, and runs on a two-hour cycle, quietly, efficiently, and without getting me wet. If I have a complaint it is that you either have to invest in a carrier to protect the treads, leave it in your pool most of the time, or set it somewhere in the shad upside down. In my case, pretty much all of my pool is in the sun, all day, so that doesn't help. In any case, I wish I would have purchased one of these units years ago, because it is way more convenient and easy than a pressure system and changing out the return unit eyelets, etc. This? You plug it in, drop it in the water, and hit the power button (or program it for multiple times a week). It couldn't be easier.