Part # 25831-119-750
Manufacturer Code 263064
Alternate Part #'s 26-0364, 26-1165, 261165, 263064, 25831-114-750
2" Slide Valve for Pentair Sand & D.E Filters
Note: Currently shipping in Black
PLEASE NOTE: Model #263034 & 261165 have been replaced with model #263064 which is this Aftermarket Part # 25831-119-750
This is a 2" Aftermarket Slide Valve that works on most Pentair and Pac-Fab D.E and Sand Filters which have a side-mounted valve. The valve has 2" ports meaning that the valve can accommodate 2" plumbing going into the valve. If you have 1.5" plumbing then you can use these 2" x 1.5" Reducer Bushings to accommodate 1.5" plumbing. This is an Aftermarket valve which means the valve is not made by the original equipment manufacturer (Pentair).
Specifications
Commonly Used On
Does this include the valve stem (51013811) or do you order that separately?
The handle on my existing stem broke so I am unsure if I can simply order the valve stem or need the entire slide valve assembly.
Reply
Hi, This valve does come complete with valve stem. You can order the Valve Stem Assembly (51013811) separately.
Reply
What is the difference this valve push to run pull to flush bottom outlet waste or flush? my valve and filter are 30-35 years old still work good self-cleaning jets its been glued you name it to keep it running MY VALVE is PULL or up to run PUSH to flush top outlet center outlet from pump/ bottom to dome (pool) gears for jets using a new TR 100 filter 30 inches this valve will work on the filter but will the same size as my old one would I just have to replumb it thanks bob
Reply
Hello, Bob. Here is a copy of the owner's manual for the CMP valve, click here to view. It is designed to use in place of the Pentair 263064. The valves are used on the Triton II Side Mount Sand Filters. The TR40, 50, 60, 100, and 140 have the option to use valves 261173, 263079, 261049, 261050, 261055, 263064, or 263080. You will most likely need to replumb depending on the removal process of the old valve.
Reply
