Part # W3PVS20JST
Warranty 1 Year
Manufacturer Code 896584000-013
Alternate Part #'s HAYW3PVS20JST, PVN-20-1000
The 2x Suction PoolCleaner™ uses your existing pump and filter for power. This cleaner plugs into either your designated suction port or the skimmer. The 2x is ideal for most average sized pools (6' Depth or Less).
Some of the features that make 2 Wheel POOLCLEANER™ unique:
SELF ADJUSTING TURBINE VANES
All the POOLCLEANER™ cleaners have the patented self-adjusting turbines, which maximizes the power from the water flow. This turbine is similar to a paddle wheel with blades that are adjustable. This feature allows the POOLCLEANER™ to still move at low suction and low pressure. In addition the folding vanes of the turbine allow for the easy passage of larger debris through the cleaner.
The 2x Suction POOLCLEANER™ has an internal programmed steering system, that causes the left wheel to periodically reverse, allowing the POOLCLEANER™ to turn and then move into another direction. For the 2x Suction POOLCLEANER™ there are five different programmed turns ranging from 90 to 450 degrees. This feature allows the POOLCLEANER™ to cover not only the deep end, but also the shallow end. The POOLCLEANER™ has no problem with uneven surfaces or strange shapes. It won’t stick in a corner, or get hung up by a main drain.
ROBUST TIRE TREADS
One look and you will see that the patented tire treads give the POOLCLEANER™ better climbing ability and obstacle maneuverability. The tires come with tread wear markers that show you when to replace your tires. The front tires of the POOLCLEANER™ have humps (raised treads) that allow the POOLCLEANER™ to overcome any reasonable obstacles such as the main drain and uneven surfaces. This makes the POOLCLEANER™ ideal for all pool surfaces and shapes.
The POOLCLEANER™ has patented adjustable skirts that allow the cleaner to maintain optimal suction under the machine even when it encounters obstacles. When the POOLCLEANER™ encounters an obstacle one (or more) of the skirts will lift up (adjust) over the obstacle while maintaining suction under the cleaner.
Smooth or Slippery Pool Surfaces
Optional replacement tires are available for 2-Wheel and 4-Wheel suction drive cleaners. Perfect for smooth or slippery pool surfaces such as: Glass Tile, Ceramic Tile & Fiberglass pools (tires are solid beige color and come as a pack of two). Beige Tape Tires - PVXH006HPK2
What all is included with the pool cleaner -- in addition to the 33' of hose?
The following items are included with PVN-20-0013.1 2X Suction POOLCLEANER 1 Regulator Valve and Water Gate 1 Hose Cone 9 Sections of Hose 1 Leader Hose 2 Snap On Floats
Will the PoolCleaner 2 Wheel or 4 Wheel Suction Cleaner climb my pool wall?
These cleaners may climb up a 1/4 of the way on the wall and will turn back down because of a flap mechanism on the wheel which helps it to keep from getting stuck and allows the cleaner to go in the reverse direction. Because this is a suction cleaner, it is only designed to clean the pool floor.
Do you carry a tune-up it for the 2 wheel Pool Cleaner?
Yes we do carry the tune up kit here: http://www.inyopools.com/Products/07501352046604.htm
Less than 1 hr
Determined that our existing pool Vacuum needed to be replaced. Contacted our pool service provider who recommended INYO pool supplier. We searched their webside and identified the new pool vacuum we wanted. We placed an order online, which was easy to do. We were able to track the order until it arrival. We unpacked the product and put it to use right after we received our packaged product.
(5 out of 5 stars) Best Suction side Cleaner out there!
Reviewed By: Stephen J. from Glendale, AZ ()
Pros: Good value, fewer parts to replace, full coverage in less time.
Cons: none yet
After over 20 years of using a Hayward navigator (in all its variations - really the same machine), I finally got sick of replacing a myriad of parts which just kept getting more expensive but no better [I now have an attic with no less than 3 Hayward Navigators in it]. Knew I didn't want a Barracuda as I've had too many friends buy them to replace Haywards and they just don't cover the pool well. Did the online research thing and came up the "The Pool Cleaner". Thought I'd give suction side cleaners one more try before I spent the big bucks on a robotic cleaner. I have had the cleaner about 6 months now and am very pleased with it. It cleans every bit as well as my Haywards and was very easy to set up and calibrate for speed. With the Hayward, I ran my pump 8 hours per night, every night in summer and still had problems if there was a big storm. The Pool Cleaner runs 6 hours per night and I've had a clean pool after all but the worst monsoon storms here in Phoenix (15,000 gal pool). Only once did The Pool Cleaner have a glitch... after a storm a small twig got stuck in the rotating collar on the top of the machine and caused the hose to wind itself into a knot. This was easily fixed by removing the top cover with 2 screws. So far the impeller has 'eaten' everything is has encountered. The wheel treads show very little wear for all the running time in a pebble sheen pool and their cost will be much less than the feet and/or wings on a Hayward. Why did I buy from INYOpools? They had the best price! Delivery was fast and The Pool Cleaner, hoses, and manual arrived in one box pretty much ready to go. If this machine continues to run as it has this summer I will be very pleased. One more thing that really sold me on this machine as opposed to the Hayward. On all new pools, drain covers must be the raised type for safety. My Hayward constantly hung up on those covers to the point that I installed a pair of old flush covers just so it would cover the entire pool! The Pool Cleaner just pushes right over the raised covers without complaint.
(5 out of 5 stars) The Pool Cleaner Works!!
Reviewed By: Carol B. from Nogales, AZ ()
Pros: easy to assemble, doesnt get stuck
Cons: would like it to spend more time in the shallow end
Our ingournd concrete pool is 12x20 with steep 90 degree corners and no slope. Other pool cleaners, including robotics, would get stuck in the corners. This pool cleaner, never gets stuck.
(4 out of 5 stars) Better than the Kreepy!
Reviewed By: Jason V. from League City, TX ()
Pros: great suction, powerful, efficient
Cons: sometimes the little pieces inside get stuck while turning causing the wheels to stop moving
So far this cleaner is by far better than my Kreepy Kruiser was. The suction on this is outstanding and my pool is so far beyond help but this is making a HUGE difference in the cleaning process. It even sucked up a shard of glass that had fell into the pool from a broken bottle!! AMAZING! HIGHLY recommend!
(5 out of 5 stars) Works Great!
Reviewed By: Brian C. from Temecula, CA ()
Pros: Cleans very well!
Cons: Bright white tubing
The pool cleaner works great, I probaby should have got the four wheel because it seems to stop and turn a bit too quickley but overall it is a wonderful product. And one small issue with the appearance the tubing is bright white and is really visible on the top of the pool, my Polaris had a slight gray color tubing with the unit itself being blue so it blended in more with my 3M blue pool.
(4 out of 5 stars) Pool is Sparkling Clean
Reviewed By: Jay O. from Temecula, CA ()
Pros: Ease to set up. Doesn't get stuck.
Cons: None observed yet!
Although it has only been a few days, we are very happy with "The Pool Cleaner"! The pool is swept clean daily and the cleaner doesn't get hung up anywhere (a problem we had with another model cleaner). This would be a 5 star rating if we had more time to use it before writing this review. We just don't have the length of time to know it's durability but I am sure it will be great too!