By Hayward Pool Products
Model # 896584000-525
Warranty 1 Year
Manufacturer Code W3PVS40GST
Alternate Part #'s 896584000525, HAYW3PVS40GST, HPPW3PVS40GST, PVN-20-0040
The 4x Suction PoolCleaner™ uses your existing pump and filter for power. This cleanes plugs into either your designated suction port or the skimmer. The 4x is suited for larger pools.
Features
Some of the features that make 4 Wheel POOLCLEANER™ unique:
FOUR WHEEL DRIVE
The POOLCLEANER™ is a patented 4 wheel drive. What this means to you is that in combination with the patented tire treads, the cleaner has the power to overcome obstacles that normally stop other cleaners.
SELF ADJUSTING TURBINE VANES
All the POOLCLEANER™ cleaners have the patented self-adjusting turbines, which maximizes the power from the water flow. This turbine is similar to a paddle wheel with blades that are adjustable. This feature allows the POOLCLEANER™ to still move at low suction and low pressure. In addition the folding vanes of the turbine allow for the easy passage of larger debris through the cleaner.
STEERING SYSTEM
The 4x Suction POOLCLEANER™ has an internal programmed steering system, that causes the left wheel to periodically reverse, allowing the POOLCLEANER™ to turn and then move into another direction. For the 4x Suction POOLCLEANER™ there are three different programmed turns ranging from 90 to 540 degrees. This feature allows the POOLCLEANER™ to cover not only the deep end, but also the shallow end. The POOLCLEANER™ has no problem with uneven surfaces or strange shapes. It won’t stick in a corner, or get hung up by a main drain.
ROBUST TIRE TREADS
One look and you will see that the patented tire treads give the POOLCLEANER™ better climbing ability and obstacle maneuverability. The tires come with tread wear markers that show you when to replace your tires. The front tires of the POOLCLEANER™ have humps (raised treads) that allow the POOLCLEANER™ to overcome any reasonable obstacles such as the main drain and uneven surfaces. This makes the POOLCLEANER™ ideal for all pool surfaces and shapes.
ADJUSTABLE SKIRT
The POOLCLEANER™ has patented adjustable skirts that allow the cleaner to maintain optimal suction under the machine even when it encounters obstacles. When the POOLCLEANER™ encounters an obstacle one (or more) of the skirts will lift up (adjust) over the obstacle while maintaining suction under the cleaner.
Smooth or Slippery Pool Surfaces
Optional replacement tires are available for 2-Wheel and 4-Wheel suction drive cleaners. Perfect for smooth or slippery pool surfaces such as: Glass Tile, Ceramic Tile & Fiberglass pools (tires are solid beige color and come as a pack of two). Beige Tape Tires - PVXH006HPK2
Will the PoolCleaner 2 Wheel or 4 Wheel Suction Cleaner climb my pool wall?
Reply
These cleaners may climb up a 1/4 of the way on the wall and will turn back down because of a flap mechanism on the wheel which helps it to keep from getting stuck and allows the cleaner to go in the reverse direction. Because this is a suction cleaner, it is only designed to clean the pool floor.
Reply
The limited edition 4-wheel cleaner is gray; what color are the hoses (gray or blue)?
Reply
Hi Steve. In all of the product descriptions I've seen the hoses aren't listed by color but appear to be the same charcoal color as the wheels. You can see the product page for more detailed or contact info or Google the product number for more photos. It is meant for dark-bottom pools only. Thank you for your inquery.
Reply
