By Wilbar



Part # TL10053

Alternate Part #'s 1450730, 1450833, NLR-TL10053

Product Description

Top Ledge Curved Side (Single) Sand Color

Save $$$ on a 4 Pack - Part Number TL10053-PACK4


?     Asked on 5/28/2020by Charles Moore

Can you get Part #TL10053 in the beige?

A  Answered on 11/3/2020 by InyoPools Product Specialist Hector F.

Hi Charles, unfortunately, we currently only carry this top ledge in sand color. 

?     Asked on 6/11/2019by Chris

How do I know if I need the TL10053 or the 1450453? Or do the two pieces come together? I have an Atlantic Concorde 24 foot. Photos attached. Thanks for your help!


A  Answered on 6/11/2019 by InyoPools Product Specialist Robert M.

If your parts are beige, use part number TL10053. If your parts are gray, use part number 1450453. It's hard to tell from the pictures, but they appear to be gray.

  • Commented on 6/11/2019 by Product Owner

    Confirming my understanding, the only difference between the two is the colour, right? There is nothing structurally different? Thanks again, Great service.

    • Commented on 6/12/2019 by InyoPools Product Specialist Patrick P.

      Hi Chris, yes the only difference is the color.

?     Asked on 5/28/2019by tim

is there any parts that match up with this that comes in plastic at all

A  Answered on 5/28/2019 by InyoPools Product Specialist Robert M.

Hello Tim - Unfortunately, there is not a resin option for part number TL10053.

?     Asked on 2/5/2017by Bill Hohenstein

I think this is the right piece for my pool. It is a Wilbar pool. It is a 15X30 48" tall pool. The piece is 56"1/8" and the holes are 2" apart. Can I send you pictures of the part. The top seat looks exactly like this. http://www.backyardocean.com/v/pdf/NB2501_MOREINFO_2.pdf I need 4 of them because they are rusting out. Bill

A  Answered on 2/6/2017 by InyoPools Product Specialist Megan C.

Yes, please email us a picture of the outside pool wall (top and bottom)? As well as a picture of where the top rail meets the upright?


Est. Repair Time

Less than 1 hr

Tools Needed


Top rails were rusting out.

Written on 10/1/2021 by Guest

I removed the top caps to gain access to the screws that holds on the rails. I removed the screws holding on the rails and took the old rails off, screwed the new rails on and put the top caps back on.

Were these instructions helpful? 


Review Summary

 (Average 5  out of 5 stars)
5 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews